IAC Industries QS-1011822-BL 940 Series Height Adjustable Workstation, 30″D x 60″L, EZE Blue, ESD Version

IAC Industries QS-1011822-BL 940 Series Height Adjustable Workstation

• Picture is for illustrative purposes – please see below for color and size information
• 940 Series height-adjustable workstation
• 30″D x 60″L
• ESD version
• Color: EZE Blue

The Pro Series 940 workstation is available in two shades of blue, and with or without an ESD finish. It is also available in 30″D x 60″L size, as can be seen in the chart below:

Additional options

IAC offers a variety of additional products to go with the Pro Series 940 workstation. These include drawers, power strips, shelving and much more. Please contact us at (833) 763-7837 to configure a workstation which would work best for your application. 

Drawers
The Pro Series 940 workstation is compatible with several styles of drawer. These are available in several sizes, colors and configurations.

• Drawers are constructed of a heavy-gauge steel and are equipped with full extension, 100-lb. capacity metal ball bearing drawer slides.
• May be mounted left or right and stacked for multiple-drawer/cabinet combinations.
• Safety recessed handles
• Locks are optional. Multiple drawers can be keyed alike, upon request.

The Pro Series 940 workstation is also compatible with several styles of shelving. This includes basic horizontal shelving for holding instruments, as well as larger upright structures. The following is a brief overview of compatible models. Please contact us at (833) 763-7837 to configure your workstation.

• Heavy-gauge, formed steel risers clamp onto work surface and attach to underside
• Access covers detach for installation of optional Riser Electrical Panels
• Full-length under-shelf channel support beams allow up to 500 lbs. distributed weight on worksurface
• Shelf is constructed in same manner as worksurface with matching low-glare white laminate and pre-installed threaded inserts
• ESD includes dual ground studs and 5-ft. coiled ground cord
• Powder coat paint finish
• 18″H shelves have a clearance height of 13.75″
• 21.25″H shelves have a clearance height of 17.5″

The Multi-Task System enables users to configure above-the-worksurface storage and options on an existing workstation. Perfect for upgrading on a budget. Please note, drilling and inserting will be required.

The MTS is available in two models: MTS-I with three uprights for side-by-side shelves and options, and MTS-II with two uprights that allow full width shelves and options. Each twelve-gauge steel, double slotted upright is 48″ x 2″ wide x 1-7/8″ deep. Heavy gauge, steel c-clamp mountings provide secure fastening to the worksurface with heavy duty thru-bolts. MTS upper structures will fit most workstations, provided there is a clear 1.5″ overhang in the rear.