No products in the cart.
Menu
Categories
Mecmesin ETS 0.3 – Enhanced Torque Sensor for HelixaPro and VortexPro, 0.3 N.m
44 people are viewing this product right now
$3,765.30
Shipping calculated at checkout.
Estimated delivery:5 days
ETS Torque Cell ETS 0.3N.m
- Interchangeable Enhanced Torque Sensor (ETS)
- For use with HelixaPro and VortexPro test systems
- Capacity: 0.3 N.m / 3 kgf.cm / 2.7 lbf.in
- Accuracy: ±0.5% of the sensor capacity
- 3/8-inch male square drive for connection to grips and test fixtures
- Sensor plugs into the test frame – calibration characteristics are immediately recognized
Guarantee Safe and Secure Payment Checkout
Description
Mecmesin ETS 0.3
- Interchangeable Enhanced Torque Sensor (ETS)
- For use with HelixaPro and VortexPro test systems
- Capacity: 0.3 N.m / 3 kgf.cm / 2.7 lbf.in
- Accuracy: ±0.5% of the sensor capacity
- 3/8-inch male square drive for connection to grips and test fixtures
Enhanced Torque Sensor for HelixaPro and VortexPro, 0.3 N.m
The Mecmesin Enhanced Torque Sensors (ETS) range of interchangeable torque sensors is specially adapted to the HelixaPro and VortexPro test systems. This model, the ETS 0.3, has a capacity of 0.3 N.m / 3 kgf.cm / 2.7 lbf.in.
The ETS torque sensors plug into the frame of the precision torque tester and their calibration characteristics are immediately recognized by the software without any input from the operator.
Sensor Capacity, Range, and Accuracy
There are eight different sensors available to ensure you have the optimum selection to meet your torque testing needs. All sensors measure from zero to its full nominal capacity (listed in the table below). They have outstanding measurement accuracy at ±0.5% of the sensor capacity.
| Model: | ETS 0.1* | ETS 0.2* | ETS 0.3 | ETS 1 | ETS 1.5 | ETS 3 | ETS 6 | ETS 10** |
| N.m: | 0.1 | 0.2 | 0.3 | 1 | 1.5 | 3 | 6 | 10 |
| kgf.cm: | 1 | 2 | 3 | 10 | 15 | 30 | 60 | 100 |
| lbf.in | 0.9 | 1.8 | 2.7 | 9 | 13 | 26 | 50 | 90 |
*Not recommended for VortexPro
**Not recommended for HelixaPro
A range of grips, fixing tables and chucks is available to hold your specimens (sold separately). Connection to each ETS sensor is via a 3/8-inch male square drive (ETS 0.3 – 10) or via a 1/4-inch female hexagonal drive (ETS 0.1 – 0.2).
Force / Torque / Hardness Meters/Torque Instruments Template | |
|---|---|
| Engineering Units (Torque) | lbFin, Nm, Other |
| Accuracy | ±0.5% of the sensor capacity |
Product General Attributes | |
| Warranty | 2 YEARS |
You must be logged in to post a review.
Related products
Sale
Mark-10 FS05-100 – Plug and Test Force Sensor, Tension/Compression, 100 lbF
Original price was: $1,413.50.$1,342.82Current price is: $1,342.82. Add to cartSale
Mark-10 M5-10 – Digital Force gauge, 10 lbF / 160 ozF / 5 kgF / 5000 gF / 50 N
Original price was: $1,375.00.$1,306.25Current price is: $1,306.25. Add to cartSale
Shimpo MF-50 – Mechanical Force Gauge, 50lb Capacity
Original price was: $495.00.$445.50Current price is: $445.50. Add to cartSale
Mark-10 MR01-500 – Force sensor, 500 lbF / 8000 ozF / 250 kgF / 2500 N / 2.5 kN
Original price was: $770.00.$731.50Current price is: $731.50. Add to cart
Mecmesin ETS 0.3 – Enhan... $3,765.30
Our team of knowledgeable professionals is here to help you make informed decisions. Whether you need product recommendations, technical support, or guidance on your purchase, we're just a click away.
Contact Us Now:
📧 sales@nestesinstruments.com
📞 +1 (833) 763-7837
Let us assist you in finding the perfect solution!
Contact Us Now:
📧 sales@nestesinstruments.com
📞 +1 (833) 763-7837
Let us assist you in finding the perfect solution!
Reviews
There are no reviews yet.