Rigol M300 Data Acquisition Switch System

M300 Series Data Acquisition/Switch System with modular structure, which combines precision measurement capability with flexible signal connections, can provide versatile solutions for the applications with multiple points or signals to be tested in product performance test during R&D phase as well as automatic test during production process.

M300 Series Data Acquisition/Switch System

Feature and Benefit

• Channel Configuration Guide

Measurement Configuration	Scaling Configuration
Alarm Configuration	Advanced Configuration

• Channel Monitor

Single Channel Monitor	Multiple/All Channel Monitor

• Multi-View Switch

Display real-time scan information and all the  measurement data of the channel selected	Display real-time channel status
Draw scan data curves	Record each relay cycle on each module
Alarm Information	Error Information

• Multiple Configuration Copy Functions

Multiple configuration copy function, can configure  multiple channels conveniently and quickly	Module Copy
Channel Copy	Extended Copy

• To Control Each Module Separately

To control each module separately	MC3132 Control Interface
MC3164 Control Interface	MC3648 Control Interface
MC3534 Control Interface	MC3416 Control Interface

• Channel Configuration of Ultra Acquire

• Data Analysis of Ultra Acquire

Modules/Terminal Box Supported by M300

Module	Terminal Box	Description
DMM-MC3065		DMM module Used to measure the signal 6½ digits Support the following functions: DCV, ACV, DCI, ACI, 2WR, 4WR, FREQ, PERIOD, TEMP and any sensor After connecting the DMM module, make sure that the signal under test connected to the analog bus is no greater than 300 Vdc or 300 Vrms
MUX20-MC3120	TB20	20-channel multiplexer All 20 channels switch both HI and LO inputs Support 4-wire measurement The signal to be tested is connected through the TB20 terminal box Can be connected with MC3065
MUX32-MC3132	TB32	32-channel multiplexer All 32 channels switch both HI and LO inputs Support 4-wire measurement The signal to be tested is connected through the TB32 terminal box Can be connected with MC3065
MUX64-MC3164	TB64	64-channel single-ended multiplexer All 64 channels can switch HI input only Doesn’t support 4-wire measurement The signal to be tested is connected through the TB64 terminal box Can be connected with MC3065
MIX24-MC3324	TB24	Mix multiplexer with 20 voltage channels and 4 current channels All 20 voltage channels switch both HI and LO inputs 20 voltage channels support 4-wire measurement 4 current channels are used to measure DC current or AC current The signal to be tested is connected through the TB24 terminal box Can be connected with MC3065
ACT-MC3416	TB16	16-channel actuator Can connect signal to the device under test or enable external device Any of the 16 channels can switch to Normally-Open (NO) and Normally-Closed (NC) states The signal is connected through the TB16 terminal box
MFC-MC3534	TB34	Multifunction module DIO: four 8-bit digital input/output ports TOT: four totalizer input terminals DAC: four analog output terminals The signal is connected through the TB34 terminal box
MATRIX-MC3648	TB48	4×8 two-wire matrix switch used to connect multiple devices to multiple points on the device under test 32 two-wire cross points which can connect any combination of inputs and outputs at the same time The signal is connected through the TB48 terminal box