Televes 560383 – Kit: Mast Amplifier with BOSS-Tech and “F” Power Supply Unit (Repack Ready)

• Repack ready
• “F” connectors
• ON/OFF switch to allow DC pass towards the input for the powering of a BOSS system
• Easy mounting. Equipped with a plastic tie for mast mounting
• Resistant ABS-plastic black case for outdoor installation

This mast-mounted preamplifier features one input covering the entire TV band and can be used with any TV antenna (VHF, VHF/UHF or UHF). Unique to Televes, the new T-Force preamplifier family features automatic gain control ensuring an optimum amount of signal is delivered at all times despite changes in the receiving conditions and avoiding over or under amplification situations. The automatic gain control is independent per band so that adjustments to the UHF channels do not impact VHF channels and vice-versa. It features high gain and powerful output level while the high screening cast metal chassis ensures best-in-class electromagnetic shielding protection. Cast metal and high-grade ABS plastic construction for reliable outdoor installation withstanding the harshest elements.

This particular unit is an entirely new design optimized for the new repack TV frequencies. Its fine-tuned steep filters reject any out-of-band interference, including FM and 5G signals over 608 MHz.

A low-consumption UL-listed power supply is included providing two outputs for convenient distribution to additional TV sets. This Televes preamplifier can also pass power to an active antenna when needed.

• The amplifier will automatically adjust its gain for each band independently overtime to ensure optimum signal delivery. No configuration/settings are needed.
• The antenna used should be able to receive the desired frequency bands: LowVHF, HighVHF or UHF.

• The amplifier will automatically adjust its gain for each band independently overtime to ensure optimum signal delivery. No configuration/settings are needed.
• The antenna used should be able to receive the desired frequency bands: LowVHF, HighVHF or UHF

• To optimize the signal quality in fringe situations and when band dedicated UHF only and VHF only antennas are used, it is recommended to combine the antenna signals with a VHF/UHF diplexer (Ref. 404010) and connect the resulting feed to the amplifier.