Hammond 1420 – Type 1 Mild Steel Wallmount Enclosure; Hinge Door with Quarter Turn and w/Mounting Flange

Standards

• UL 508A Type 1
• CSA Type 1
• Complies with
• NEMA Type 1
• IEC 60529, IP20

Application

• Designed for indoor use to house controls, instruments, and components which do not require oil-tight or dust-tight protection.

Construction

• Enclosure is formed and spot welded from 12- or 14-gauge steel.
• Removable 12-gauge inner panel is mounted to the rear of the enclosure on collar studs.
• Removable door is attached with slip hinges.
• To remove the door, a tool is required to remove the #8 screw which captivates the hinge.
• Door is fastened with a slotted 1/4 turn latch; doors 30″ and higher are provided with two latches.
• A bonding stud is provided on the door and a grounding stud is provided in the box.
• Piano hinge on 12-gauge units.

Finish

• Enclosure and door are finished in ANSI 61 gray powder coating.
• Inner panel is finished in white powder coating.