Hammond 1418 N4 AL – Type 4X Aluminum Wallmount Enclosure; Continuous Hinge Door with Clamps

• Standards
• UL 508A Type 4, 4X, 12 and 13
• CSA Type 4, 4X, 12 and 13
• Complies with
• NEMA Type 4, 4X, 12 and 13
• IEC 60529, IP66

Application

• Designed for use as instrument enclosures, electric, hydraulic, or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
• Provides protection where equipment may be hosed down or otherwise be very wet or in specific applications where corrosion may be a problem.

Construction

• Formed from 0.081” (Body) / 0.100” (Door) Type 5052 H-32 aluminum.
• Smooth, continuously welded seams without knockouts, cutouts, or holes.
• Door and body stiffeners are provided in the larger enclosures for extra rigidity.
• Welded brackets provide for enclosure mounting.
• Formed lip on the door and enclosure excludes flowing liquids and contaminants.
• Aluminum continuous hinge on the door may be removed by pulling the aluminum hinge pin.
• Door is secured with easily operated aluminum clamps.
• Provision for padlocking.
• Seamless poured-in place gasket.
• A removable 12-gauge steel inner panel is included.
• Collar studs are provided for mounting inner panels.
• A bonding stud is provided on the door and a grounding stud is provided in the enclosure.
• A literature pocket is provided for the inside of the door.

Finish

• Cover and enclosure are natural unfinished aluminum.
• Removable inner panel is finished in white powder coating.