WR3000M Rework System – WR3M Power Unit (400 watt), with WP80, DXV80, HAP200, WVP

WR3000M Rework System – WR3M Power Unit (400 watt), with WP80, DXV80, HAP200, WVP ×

400 watts of power over 3 independently controlled channels Air and vacuum ports allow the use of up to 3 tools simultaneously Compatible with high speed micro tools WMRP and WMRT New HAP200 200 watt hot air pencil for efficient lead-free rework

The WR3000M is a complete rework system based around the Weller WR3M power station. It includes a WP80 soldering iron, DXV80 desoldering iron, HAP200 hot air pencil, WVP vacuum pick up tool, as well as several stands, tips and nozzles. For a complete list, please see the tab labeled “What’s In The Box”.

The Weller WR3M is a three channel station with soldering, desoldering, and hot air functionality. The WR3M is a self contained unit with internal pumps generating all necessary air pressure, and is compatible with over 20 Weller handpieces and accessories. The WR3M is an extremely versatile machine and serves all your major soldering functions. You no longer need several units cluttering your workbench – this unit does it all.

The WR3M provides 400 watts of power, through three independently controlled channels – up to 200 watts of hot air, 120 watts of de-soldering, and 200 watts of soldering. In addition, the WR3M offers peripheral control for soldering baths and pre-heating plates.

Airflow volume with the WR3M is adjustable between 1-15 L/Min, enabling users to fine tune the output as needed for their application. Transitioning between work on small SMD components, to heating large areas is as simple as pressing a button. The WR3M features an easy to use interface, with a large, intuitive LCD showing critical functions for all three channels.

The Weller WVP vacuum pickup tool can also be used with the WR3M. The WVP is extremely useful when working with small parts, which may be difficult to handle with bare fingers. The WVP uses vacuum pressure to hold a component as you place or remove it from your board.

The WR3M is compatible with all of the products below. Please note, this is just a partial list, as there are many other accessories available.
 

• WTMT – 2 x 40 watt tweezer
• WMRPMS – 55 watt soldering iron (active tip)
• WMRTMS – 2×40 watt tweezers (active tip)
• WP65 – 65 watt soldering iron
• WRK – desoldering set
• WP120 – 120 watt soldering iron
• DXV80 – desoldering iron
• DSX120 – desoldering iron
• HAP200 – hot air pencil
• HAP1 – hot air pencil
• WHP80 – preheating plate
• WSB80 – soldering bath