JBC JTSE-1UA – Hot Air Control Unit

JBC JTSE-1UA – Hot Air Control Unit

The JBC JTSE-1UA is a high-powered hot air station.

Please note: this item is only the control unit and does not include the hose/handle, or an extractor desk. If you do not already have the hose/handle, please see part number JTSE-1A or TESE-1A for a complete system.

Profiles Mode

There are two work modes to choose from – manual and profile. In manual mode, the operator can set temperature values and air flow rate depending on the task. In profile model, the operator can set up and edit as many as 25 profiles for temperature and airflow.

Manual mode

In manual mode the operator can set temperature values and air flow rate depending on the task.

Profile mode

In this mode the operator can set up or edit as many as 25 profiles of temperature and air flow.

Control Thermocouple

Users can read the temperature at a specific point on the PCB with the control thermocouple. This helps protect components or a specific area on the PCB, and provides greater precision when regulating the temperature.

There are two work modes available for use with the control thermocouple:

Regulation: the station regulates the air temperature automatically to maintain the External Thermocouple (TC) temperature.

Protection: the station cuts the air supply off when the External Thermocouple (TC) temperature is reached.

Auto-stop Function

The auto-stop function is a safety measure which guarantees the heat is automatically cut off when the tool is in the stand. This also means you save power and extend the life of the tip. There is also an auto start feature. When selected, the tool automatically heats up when lifted from the stand.