Pace PRC2000E – Electronics Repair System (8007-0133); 230 VOLT VERSION

• ***230 VOLT VERSION – only available for shipment to North or South America***
• For the 120-volt model, please see part number 8007-0132
• Legendary military workhorse
• Proven reliability, longevity, and durability
• Utilized at all major US and International Military depots

Please note – this model is the 230-volt version and can only be shipped to North or South America. For the 120-volt model, please see part number 8007-0132.

Utilized at all major US and International Military depots, you’ll find the PRC 2000 at shipboard repair shops, mobile NAVSEA 2M Miniature/Microminiature Electronic Repair Program maintenance vans, and thousands of intermediate maintenance facilities worldwide. The system is a venerable workhorse that has been available since the early 90s. System quality, reliability, longevity, durability, and sustainability have been proven through millions of military operating hours. In fact, the PRC 2000 is a central component of the Navy’s 2M Miniature/Microminiature Repair Program. The 2M Program provides the tools and techniques required for certified Navy, Marine Corps, Air Force, and Coast Guard electronic repair technicians to perform highly reliable, high-quality repairs on complex circuit card assemblies. System, handpieces, tips, accessories, and spare parts are extensively supported by National/NATO Stock Numbers (NSN’s)

The Ultimate PCB Rework & Repair System

The PRC 2000 can tackle just about any Thru-Hole, SMT application, and is well-suited for multilayer repairs on damaged or prototype PCBs. Featuring 3 simultaneously active SensaTemp handpiece channels, a built-in paste dispenser, MicroChine for removing conformal coatings or grinding away PCB laminate, and pulse heat technology. The PRC 2000’s Thermal Management Center powers and controls three SensaTemp handpieces simultaneously for safe, rapid installation and removal of virtually all surface mount and thru-hole components. It is fully self-contained with three separate pumps: one for desoldering, hot air jet, and thermal pick handpieces; another for solder paste/liquid flux dispensing; and finally a separate pump for Pik-Vac Component Handling Wand. Other features include continuous automatic calibration, temperature setback/auto-off safety system, constant memory, password protection, and more!

9 Primary Handpieces

1. SX-100 Sodr-X-Tractor Desoldering Handpiece: renowned as the best continuous vacuum desoldering tool on the planet, the SX-100 Solder Extractor has been improved so that it does not clog!

2. PS-90 Universal Soldering Iron: excellent for general purpose and heavy-duty soldering and SMT rework operations where high thermal capacity and flexibility are required.

3. TP-65 ThermoPik Handpiece: provides safe, one-handed reflow and removal of a wide variety of QFPs in just seconds.

4. TJ-70 ThermoJet Convection/ Hot Air Handpiece: primarily used for safe, continuous flow of precision-focused hot air for component installation and SMT land preparation, but also used to overture epoxy or soften urethanes during conformal coating removal.

5. TT-65 ThermoTweez Thermal Tweezer: provides safe, one-handed reflow and removal of both 2-sided chip or SOIC components, PLCC’s, LCCC’s, QFPs, and other four-sided SMD components.

6. PV-65 Pik-Vac Vacuum Wand: a component handling wand with a finger-actuated release for precise component pick-up & placement.

7. LF-15 LapFlo/ThermoPart Handpiece: uses quick-connect, plug-in tips that allow for single-point or multi-point (hot bar) soldering of flat packs, SOIC’s and other extended lead devices. When used with the Thermal Parting Tip (shown in photo), it acts as a hot knife, over curing epoxy conformal coatings for easy removal.

8. MC-65 MicroChine Miniature Machining Handpiece: a lightweight, variable speed machining handpiece for milling, drilling, grinding, and abrading of PCB’s and precise circuitry and substrate repair as well as modification and conformal coating removal.

9. TW-15 ResisTweez Resistance Soldering Tweezer: a “pulse-heat” handpiece that allows for fast resistance heating for soldering or desoldering of closely spaced connector pins, cup terminals, and lugs.

Advanced System Capabilities

• ESD-safe repair of any electronic module, PCB, or PWB including multilayer and flexible printed circuits
• Easy and safe removal of surface mount/thru-hole components from circuit card assemblies
• High-reliability soldering via conductive, convective, resistance, and lap reflow soldering techniques
• Clog-free desoldering using continuous vacuum Solder Extraction – shop air not required
• Conformal coating removal, including epoxy, urethane, silicone & acrylic … even parylene coating
• Precision drilling, grinding, abrading, routing, brushing, and cutting, for conformal coating removal/pcb repair
• Drilling Test Probe/Brake Probe capability for multilayer pc board excavation
• Substrate repair, including burns and delamination
• Damage-free thermal wire stripping for removal of all types of insulation, including Teflon
• Self-contained solder paste and flux dispensing – no shop air needed
• Built-in vacuum for vacuum/component handling wand.