Jensen Tools JTK-46W – Communications Kit w/ Test Equipment in Single Gray Cordura Case

• Single gray cordura case
• Communications kit with test equipment
• Kits containing the test equipment now include upgraded tone and probe
• Access, test and repair phone equipment, modems, FAX, switches and distribution systems

The Jensen Tools JTK-46W is a communications kit with test equipment in single gray Cordura case. The JTK-46W is packed full of tools needed to access, test, and repair phone equipment, modems, fax, switches and distribution systems. The tool kit has been upgraded and now includes Greenlee’s current tone generator and tone probe.

The JTK-46W have been updated and now include Greenlee’s 77M-G tone generator and 200B-G tone probe. Tuff Cordura™ case has three exterior pockets providing room for spare parts, extra equipment and documents. Inside storage pocket may be used for storing test leads and small parts. D-rings attached for optional shoulder strap.

• 1 x Techni-Pro 191-209 5″ Straight Hemostats
• 1 x Techni-Pro 36B906 Nutdriver Blade, 3/16″ Drive Size, Metal
• 1 x Techni-Pro 95324 Individual 6″ Adjustable Wrench
• 1 x Techni-Pro 36B908 Nutdriver Blade, 1/4″ Drive Size, Metal
• 1 x Eklind 20911 Medium Inch Set
• 1 x Techni-Pro 36B910 Nutdriver Blade, 5/16″ Drive Size, Metal
• 1 x Jon-ard Tools M-130/SX5-EACH 8″ Push-Pull Spring Tool
• 1 x Techni-Pro 36B911 Nutdriver Blade, 11/32″ Drive Size, Metal
• 1 x Techni-Pro 185-035 Slotted/Phillips Ratchet Driver
• 1 x Techni-Pro 36B912 Nutdriver Blade, 3/8″ Drive Size, Metal
• 1 x Techni-Pro 960114 2-in-1 Screwdriver
• 1 x Techni-Pro 36B914 Nutdriver Blade, 7/16″ Drive Size, Metal
• 1 x Techni-Pro 1-003/4012 Miniature Diagonal Cutters 4-3/8″ Long
• 1 x Techni-Pro 36B916 Nutdriver Blade, 1/2″ Drive Size, Metal
• 1 x Techni-Pro 1-005/5002 Diagonal Cutting Pliers 5-1/4″ Long
• 1 x SN55VN Xcelite Plier Long Nose w/ Cutter Serrated 5 1/2
• 1 x Techni-Pro 1-006/G270P-NP 7″ Long Groove Joint Pliers with 1-1/8″ Capacity
• 1 x General Tools 305ME RULE 6″
• 1 x Techni-Pro 1-007/4024 Miniature Chain Nose Pliers with Serrated Jaws 4-7/8″ Long
• 1 x Moody 55-0208 Jeweler’s Screwdriver Set, 7 pc.
• 1 x Eveready PLED23AEH Silver Penlight with Batteries
• 1 x Techni-Pro 32E61 Deluxe Stranded Wire Stripper 16-26 AWG
• 1 x Jon-ard Tools JIC-22035/10 Probe Pick Spudger -7″
• 1 x Techni-Pro 33E61 Cutter/ Stripper HD 30-22AGW
• 1 x Jensen Tools 03-00-006717 Single Gray Cordura Plus Case w/ pallets only
• 1 x Techni-Pro 902-319custom Combo Knife and Screwdriver
• 1 x Techni-Pro 419-333 Tweezers, Economy, Reverse-Action, Fine, 4.75″
• 1 x Waldom 8608 Miniature Potentiometer-Trimmer
• 1 x Techni-Pro 175S Serrated Blade Strip Jaw Scissors
• 1 x Techni-Pro 758ST926 Wrist Strap, Hook & Loop Adjustable, 1/8″ (4mm) Snap, 6 ft. Cord, Blue/Black
• 1 x Techni-Pro 36B018 Slot Blade 1/8″
• 1 x Ullman Devices E2TM Telescoping Inspection Mirror and Pick-Up Tool
• 1 x Techni-Pro 36B050 Slot Blade, 1/4″ Drive Size, Slotted Tip, Metal
• 1 x Techni-Pro 758SC313 Double-Ended Nylon Screw Starter, 9″
• 1 x Techni-Pro 487-750 #0 x 3″ Phillips Pocket Clip Screwdriver
• 1 x Techni-Pro 758SO301 Prober, Spudger and Alignment Tool, 6″
• 1 x Techni-Pro 487-745 3/32 x 3″ Slotted Pocket Clip Screwdriver
• 1 x Infinite Electronics M81969/1-02 Insert Extract Tool #20, Red
• 1 x Techni-Pro 36B811 Slotted Blade 3/16
• 1 x Fluke Networks 10054000 D814 Impact Tool
• 1 x Artisan Hand Tools 36B820 Phillips Blade #0
• 1 x Fluke Networks 10176225 110 Blade
• 1 x Techni-Pro 36B821 Phillips Blade # 1
• 1 x Tempo Communications 77M-G Tone Generator 77M-G
• 1 x Techni-Pro 36B822 Phillips Blade #2
• 1 x Tempo Communications 200B-G Tone tracing probe 200B-G
• 1 x Techni-Pro 36B901 Handle, 4-1/8″ L, Plastic, Yellow
• 1 x Fluke Networks 30800001 Test Set with Piercing Pin Clips, TS30 Series
• 1 x Techni-Pro 36B902 Handle, 3-1/8″ L, Plastic, Yellow
• 1 x Jensen Tools 10220100 6-Wire Adapter
• 1 x X-celite 99X5N Extension, 4