No products in the cart.
Menu
Categories
Fluke 772 Milliamp Process Clamp Meter with Loop Power
16 people are viewing this product right now
$1,586.18
Shipping calculated at checkout.
Estimated delivery:4 days
Fluke 772 Milliamp Process Clamp Meter with Loop Power, 4-20 mA
- Best in class 0.2 % accuracy
- 0.01 mA resolution and sensitivity
- Measure 4 to 20 mA signals without ”breaking the loop”
- Measure mA signals for PLC and control system analog I/O
- Dual backlit display with both mA measurement and percent of 4 to 20 mA span
- Measurement Spotlight illuminates hard to see wires in dark enclosures
- Detachable clamp with extension cable for measurements in tight locations
- Measure 10 to 50 mA signals in older control systems using the 99.9 mA range
- Automatically change the 4 to 20 mA output for remote testing
- Power saving features, auto-off, backlight timeout extend battery life
- Hold function captures and displays changing measurements
- Measure 4 to 20 mA signals with in-circuit measurement
- Simultaneous mA in-circuit measurement with 24V loop power for powering and testing transmitters
- Source 4 to 20 mA signals for testing control system I/O or I/Ps
- mA output linear ramp or 25% step output
- Automatically change the 4 to 20 mA output for remote testing
Guarantee Safe and Secure Payment Checkout
Description
Need more hours in your day?
Save time by NOT breaking the loop on 4-20 mA signal measurements.
Are you spending time:
- Taking mA measurements by removing a wire and breaking the loop
- Calling the control room to isolate a loop
- Testing analog input/output on a console
- Troubleshooting devices with mA inputs and outputs
- Repairing intermittent or erratic 4-20 mA loops
- Going back to the shop to get extra tools
If you need more time in your busy day take a good look at the Fluke 771 mA Clamp Meters. It’s designed to save you time, and money, by eliminating time wasting activities. Now you can troubleshoot and repair 4-20 mA loops without breaking the loop or bringing down the system.
Here are some specific ways the Fluke 772 Clamp Meters will help you:
| Milliamp Clamp Features | Application | How it saves time and money |
| Measure mA signals for PLC and control system analog I/O without breaking the loop. | Measures low level dc current | Correlate process indication with real physical value |
| Measure output signals from transmitters without breaking the loop | Maintain and troubleshoot process and automation equipment without breaking the loop | No disruption to the process |
| Detachable clamp with extension cable | Measurements in tight locations | Enables measurements in difficult situations |
| Measurement Spotlight | Illuminates hard to see wires in dark enclosures | Measurement process is easier and quicker |
| Measure up to 99.9 mA range non-contact | Wide range of measurements | Measures 10 to 50 mA signals in older control systems |
| Automatic power off | After 15 minutes and 2 minute automatic off for backlight and spotlight | Saves battery life |
| Fluke-771 | Fluke-772 | Fluke-773 | |
| Non-contact mA loop measurement | Integrated mA loop troubleshooting | Advanced process troubleshooting | |
| mA measure, jaw | • | • | • |
| mA measure, in circuit | • | • | |
| Loop power | • | • | |
| mA source | • | • | |
| DCV measure | • | ||
| DCV source | • | ||
| mA scaled output | • | ||
| mA in / out | • |
Clamp Meters/Clamp Meters Template | |
|---|---|
| True RMS | No |
| Maximum Current DC | 100 mA (0.1 A) |
| Maximum Conductor Size | 0.177 IN |
| Resistance | No |
| Capacitance | No |
| Auto Ranging/Manual | Manual |
| In-Rush Current | No |
Process / Calibration/Signal Calibrators/Loop Calibrators Template | |
| Measure Inputs | Yes |
| Source Outputs | Yes |
| Display (Loop Calibrators) | Dual |
| Maximum Current | 99.9 mA (0.100 A) |
| Current Measurement Resolution | 0.01mA |
| Current Accuracy | 0.2% |
| Measure RTD | No |
| Measure T/C | No |
| Measure Resistance | No |
| Measure Frequency | No |
| Measure Thermistor | No |
| Programmable | No |
| Auto Step/Ramp | Yes |
| Hart Compatible | No |
| Intrinsically Safe | No |
Process / Calibration/Milliamp Calibrators Template | |
| Source/Simulate DC Current | Yes |
| Measure DC Current | Yes |
| Two Wire Transmitter Simulation | Yes |
| Percent Display | Yes |
| Accuracy | 0 to 20.99 mA: 0.2%+2 counts 21.0 mA to 100.0 mA: 1%+5 counts |
| Simulate Loop Voltage | No |
| Backlight | Yes |
| Ramp/Step Output | Yes |
| Battery Life | 12 HR |
| FieldBus Compatible | No |
Product General Attributes | |
| Unique Features | mA in/out: simultaneously measure the mA signal with the clamp and source a mA signal – Apply a mA input signal to a device and measure its’ 4 to 20 mA output on devices such as valves or mA isolators. |
| Warranty | 3 YEARS |
| Warranty Details | One-year on mA clamp assembly and cable. |
| IP Rating | IP40 |
| Product Weight | 14.4 OUNCES (0.9 LBS) |
| Product Height | 9.75 IN |
| Product Length | 1.62 IN |
| Product Width | 3 IN |
| Data Logging | No |
| HTS/Schedule B Number | 9030.31.0000 |
| ECCN Number | 3A992 |
| Calibration Included | None |
| CA Residents | Warning: Cancer and Reproductive Harm – www.P65Warnings.ca.gov |
| Power Supply Voltage | Battery Powered |
| Country of Origin | China |
You must be logged in to post a review.
Manuals/Guides
Brochures
- Fluke mA Clamp Meter ROI Guide Brochure
- Fluke Oil and Gas Downstream Brochure
- Fluke Oil and Gas Midstream Brochure
- 771/772/773 mA clamp meter ROI guide
- Fluke 771 772 773 Core Features
- Fluke 771 772 773 Extended Features
- Fluke 771 772 773 Product Introduction
- Fluke 772 773 Calibration Manual
- Fluke 772 773 Features and Benefits
- Fluke 772 773 Instruction Sheet Supplement
- Fluke 772 773 Instruction Sheet
- Fluke 772 773 Statement of Memory Volatility
- Fluke 771/772/773 Milliamp Clamp Meter
- Breaking New Ground Without Breaking The Loop
- Fluke Breaking New Ground without Breaking the Loop Application Note
- Fluke Clamp meter ABC's Application Note
- Fluke Electronics in your Building don't Like Power Problems Application Note
- Fluke Troubleshooting 4-20 mA Process Control Systems without Breaking the Loop Application Note
| Weight | 14.4 lbs |
|---|---|
| Dimensions | 1.62 × 3 × 9.75 in |
Related products
Sale
Meriam ZM1000-DN0015 Digital Calibrator
Original price was: $1,208.00.$1,135.52Current price is: $1,135.52. Add to cartSale
Meriam ZM2000-DN0100 – M2000 Series Digital Calibrator
Original price was: $1,911.00.$1,796.34Current price is: $1,796.34. Add to cart
Fluke 772 Milliamp Process Cla... $1,586.18
Our team of knowledgeable professionals is here to help you make informed decisions. Whether you need product recommendations, technical support, or guidance on your purchase, we're just a click away.
Contact Us Now:
📧 sales@nestesinstruments.com
📞 +1 (833) 763-7837
Let us assist you in finding the perfect solution!
Contact Us Now:
📧 sales@nestesinstruments.com
📞 +1 (833) 763-7837
Let us assist you in finding the perfect solution!
Reviews
There are no reviews yet.