Description
Time Mark 260 Series
Over or Under Voltage Monitor

- Automatic Reset, 50-400 Hz
- Plug-in Mounting
- 5 Year Unconditional Warranty
- Monitors for Over or Under Voltage
- LED status indicator
The Model 260 Voltage Sensor is a single setpoint voltage sensor. Input voltages above the setpoint cause the output contacts to energize (contacts 1 & 8 closed). Input voltages below the setpoint cause the output contacts to de-energize (contacts 1 & 2 closed). The dead band between pull-in and drop-out is less than 2%. The standard unit has a screwdriver, or fingertip adjustable setpoint range of approximately 35% of the maximum voltage. This device can also be provided with a factory
calibrated trip point. AC versions of the Model 260 Voltage Sensor are not frequency sensitive, and may be used in systems from 50Hz to 400Hz. DC models are not polarity sensitive. This device requires a standard 8-pin socket, such as Time Mark’s Model 51X120.
| Dimensions | Typical Application |
![]() | ![]() |
Voltage Frequency Monitor Relays | |
|---|---|
| Voltage Frequency Monitors Function | Over or Under |
| Time Mark Mounting | 8-pin |
| Nominal Voltage (monitor relays) | 160-250 VAC |
Product General Attributes | |
| Warranty | 5 YEARS |
| Warranty Details | This product is warranted to be free from defects in materials and workmanship, and is covered by our exclusive 5-year Unconditional Warranty. Should this device fail to operate for any reason, we will repair it for five years from the date of manufacture. For complete warranty details, see the Terms and Conditions of Sales page in the front section of the Time Mark catalog or contact Time Mark at 1-800- 862-2875. |
| Safety Approval | CSA, UL |
| Product Weight | 0.41 LBS |
| Product Height | 3.80 IN |
| Product Length | 1.95 IN |
| Product Width | 1.95 IN |
| HTS/Schedule B Number | 8542.90.0000 |
| ECCN Number | EAR99 |
| Country of Origin | United States |
| UPC | 662917006744 |



Reviews
There are no reviews yet.