SPM Vibration 44011 – Shock Pulse Transducer for Ex Environment (M8, 68.5mm Length)

• Shock Pulse Transducer for Potentially Explosive Atmosphere (Mining, Explosive gases/dust)
• Ex Certifications: I M1 Ex ia I Ma, II 1G Ex ia IIC T4 Ga, II 1D Ex ia IIIC T 135°C Da, Ta: -40°C to +120°C
• Thread: M8 x 1.25
• Length: 68.5mm

The SPM 44000 family of transducers for potentially explosive atmospheres is approved for use in mining, explosive gases, and dust. The transducer is connected to a measuring SPM instrument for bearing condition monitoring. Measuring instruments in hazardous areas must be suitable certified. Instruments outside hazardous areas must be connected via a suitable and certified barrier.

The transducer connector must be fitted with either a mating cable plug or a protection plug to maintain the ingress protection of minimum IP54. The isolation foot must not be exposed to the flow of non-conductive media and hazardous electrostatic charging must be avoided when used in group IIC zone 0 or used in group IIIA/B/C atmosphere.

Leonova Emerald, Intellinova Parallel MB