Keysight N9917B – FieldFox Handheld Combination Microwave Analyzer (18 GHz)

• Standard model includes cable and antenna analysis (CAT)
• Expand capabilities with optional VNA, spectrum analyzer, built-in power meter, vector voltmeter, and more
• Carry one portable instrument that handles routine maintenance and in-depth troubleshooting
• Use the industry’s lightest all-in-one analyzer at only 7.4 lb
• CAT and vector network analysis frequency: 30 kHz to 18 GHz (VNA via option)

The Keysight N9917B is a handheld combination microwave analyzer. The standard model has a frequency range of 30 kHz to 18 GHz and has the following functionalities:

• Cable and antenna analysis
• Measurements: DTF (dB, linear, VSWR), return loss and DTF, return loss (dB), and 1-port cable loss
• Calibrations: CalReady, OSL, and response calibration
• Note: 2-port insertion loss is NOT included with the base model. If 2-port insertion loss is needed, order Option 210
• Note: Base analyzer does not have phase information. For S11 or S21 phase, order Option 210

What is a combination analyzer? / Information on options
This FieldFox model is referred to as a combination analyzer, which is a device with multiple testing capabilities.

• Combination analyzer (combo) = Cable and antenna tester (CAT) + Vector network analyzer (VNA) + Signal analyzer (SA)

Vector network analysis and spectrum analysis are available with software options.

There are over 30 optional features available, enabling users to customize this instrument to their specific application. For detailed information regarding options,  please view this document beginning on page 4.

Further information on software features can also be viewed in the FieldFox software guide.

Options can be added to your order from the accessories section on the left side of this page.

For information on the other models in the FieldFox series, please see the selection information further below on this page.

Fifty to sixty percent of microwave-link equipment issues are related to cables, antennas, and connectors. Degraded feeder lines cause poor coverage, link failures, and reduced sensitivity in the receive path. To maintain microwave link quality, it is critical to keep cable and antenna systems in good working condition. FieldFox is uniquely qualified to provide all the necessary measurements to troubleshoot and maintain these systems.

Many models to choose from

The Keysight FieldFox series contains a large number of models, separated into two groups, the A series and B series.

Between the two series, there are over 40 FieldFox models to choose from. The documents below provide detailed information on both product capabilities, as well as available options for each. Each bullet in the list below will open a document in a new window. The FieldFox offers a variety of bandwidth ranges, and is easily customizable to your specific application via software options.

Please note, option part numbers are specific to each analyzer and can be viewed in the accessories section on the left side of their respective pages. For example, option 010 for an N9913B and N9915B would be N9913B-010 and N9915B-010.

• FieldFox A and B series comparison
• FieldFox A series data sheet 
• FieldFox B series data sheet
• FieldFox A series technical overview
• FieldFox B series technical overview
• FieldFox A series configuration guide
• FieldFox B series configuration guide