Rohde & Schwarz ENV216.16 – Two-Line V-Network For Disturbance Voltage Measurements on Single-Phase EUT

• Frequency range 9 kHz to 30 MHz
• Power handling capacity up to 16 A (country-specific)
• Simulated impedance (50 μH + 5 Ω) || 50 Ω in line with CISPR 16-1-2
• V-network in line with CISPR, EN, VDE, ANSI, FCC Part 15 and MIL-STD-461
• Calibrated in line with CISPR 16-1-2

The R&S ENV216 two-line V-network meets the requirements of CISPR 16-1-2 and EN 55016-1-2 for V-networks with a simulated impedance of (50 μH + 5 Ω) || 50 Ω in the frequency range from 9 kHz to 30 MHz as well as the ANSI C63.4 in the frequency range from 150 kHz to 30 MHz. A socket with protective earth contacts connects to the EUT. Various models with country-specific connector systems are available. The compact design and low weight make the R&S®ENV216 ideal for frequently varying applications, especially for on-site disturbance voltage measurements on single-phase EUT.

Air-core design and artificial hand

The R&S®ENV216 two-line V-network is based on air-core inductances and contains an artificial hand.

Switch-selectable highpass filter of 150 kHz

To prevent the measuring receiver from being overdriven by low-frequency spectra of high levels, a 150 kHz highpass filter can be cut in.

Built-in 10 dB attenuator pad

To ensure standard impedance irrespective of the receiver input attenuation, the R&S®ENV216 is equipped with a 10 dB attenuator pad.

Built-in pulse limiter (can be switched off)

A built-in pulse limiter which can be switched off protects the receiver input.

Remote control with TTL levels (compatible with Rohde&Schwarz measuring receivers)

TTL control inputs that can be driven by controllers and Rohde&Schwarz measuring receivers are provided for remote control in automatic test systems (phase selection and activation of highpass filter). Optocouplers prevent pick-up of external disturbance.