Compliance HT-5000PAC-200mA – Hipot Tester, 0-5000V AC @ 200mA

• Leakage current up to 200 mA
• Microcontroller technologies, one button test, easy to setup, LED’s indicates test in progress. Upon failures buzzer sounds and testing is terminated
• Output voltage, Leakage current and test duration are controlled in the front panel.
• Zero voltage start included
• One year calibration cycle

The HT-5000P ac 200mA is a special use AC only hipot tester, can deliver up to 200 mA, with voltage output from 0 to 5000 VAC. The leakage current can be set from 5 – 200 mA in 1 mA increments in the front panel.

One year warranty, calibration certificate to ANSI Z540 included.

Option:

• Option XI: External interlock, two position terminal block on rear panel must be shorted for high voltage operation.
• Option Voltage on Hold: If a failure stops the test, the front voltage display will hold the last voltage reading.
• Option AR: Auto Reset on Pass, Resets the HT-5000P after a few seconds only on passing test conditions.