PCE Instruments PCE-EVSE 300 – PAT Tester Car Measuring Device (Proximity Plug and Control Pilot Simulation)

• EVSE adapter for charging plugs type 1 and 2
• CP line (Control Pilot) and PP line (Proximity Plug) simulation
• Shock-proof socket connection
• Direct acceptance of all connections via laboratory plugs
• PE test (protective conductor): available, error

PAT Tester

Grounding meter with memory / Mobile use possible thanks to battery / Resistance measurement / Protective conductor test / Visual connection aid / Lightning conductor test / Backlight Testing of disturbing voltages, frequencies, and currents

Electromobility is playing an increasingly important role. An important point here is the charging stations for electric vehicles. Special measuring devices are needed to check the function, protective devices, and insulation of permanently installed charging stations, also known as wallboxes. Often, measuring devices are already available to perform the required measurements. An adapter is therefore required so that the measuring device can be connected to the charging station.

The car measuring device is specially designed for this application and already comes with a variety of functions. For example, all lines leaving the charging station are output individually via laboratory plugs. Thus, all lines can be tapped via the car measuring device. This allows the charging station to be checked for insulation with the help of the car measuring device. The car measuring device has a shock-proof plug connection. The RCD tester can be used to check the residual current device.

A charging cable not only contains the supply lines for charging an electric vehicle, but also two interfaces. The electric vehicle communicates with the charging station via the CP line (Control Pilot) and communicates the current status of the electric vehicle. The PP line (Proximity Plug) is used for communication between the connected charging cable and the charging station. The charging cable can thus tell the charging station how many amps it may be loaded with. To test both functions, the car measuring device is equipped with corresponding simulators.