Chip Quik SMD4300TF10 – Tack Flux in 10cc Syringe, No-Clean Water-Washable w/ Plunger & Tip

• Ideal for all rework, solder, de-solder and reflow applications
• Non-corrosive, non-conductive, no-clean, water-washable
• Tack flux will not run all over PCB when applied
• Has a pleasant odor
• Excellent wetting

Tack Flux no-clean water-washable 10cc syringe w/plunger & tip. Low viscosity no-clean water-washable synthetic paste flux. Has a pleasant odor.

• Flux Type: Synthetic No-Clean Water-Washable (for Leaded and Lead-Free applications)
• Flux Classification: REL0
• Packaging: 10cc/10g Syringe

Shelf Life

• Refrigerated >24 months, unrefrigerated >24 months

Stencil Life

• >8 hours @ 20-50% RH 22-28°C (72-82°F)
• >4 hours @ 50-70% RH 22-28°C (72-82°F)

Stencil Cleaning

• Automated stencil cleaning systems for both stencil and misprinted boards. Manual cleaning using isopropyl alcohol (IPA).

Storage and Handling

• Store refrigerated or at room temperature 3-25°C (37-77°F). Do not freeze. Allow 4 hours for flux to reach an operating temperature of 20-25°C (68-77°F) before use.

Transportation

• This product has no shipping restrictions. Shipping below 0°C (32°F) or above 25°C (77°F) for normal transit times by ground or air will not impact this product’s stated shelf life.