SCS Resistance Pro Kit – Resistance Pro Meter Kit (770760)

• Digital compliance verification surface resistance meter kit for worksurface, floor, packaging, and more
• Resistance range: 1.0 x 10E3 to 1.0 x 10E12 Ohms
• Test Accuracy: +/- 10%
• Under load voltages: 10V or 100V +/- 5%
• Electrification period: approx. 15 seconds

The SCS Resistance Pro Meter Kit (770760) is a digital compliance verification surface resistance meter kit designed to measure resistance point-to-point (Rtt) and resistance-to-ground (Rtg) of worksurfaces, flooring systems, garments, packaging, and other materials in accordance with ESD TR53, ANSI/ESD S4.1, ANSI/ESD S7.1, ANSI/ESD STM97.1, and others.

The SCS Resistance Pro Meter also measures ambient temperature and relative humidity. The meter’s internal memory allows up to 100 measurements to be stored and recalled. These measurements include the resistance value, temperature, relative humidity and test voltages at the time of measurement. 

The SCS Resistance Pro Meter is reference and designed to be used to make measurements in accordance with the test procedures in:

• Compliance Verification – ESD TR53 – Resistance Measurement
• Worksurfaces – ANSI/ESD S4.1 Worksurfaces
• Floors – ANSI/ESD S7.1- Resistive Characterization of Materials Floor Materials
• Foot Grounders – ESD SP9.2 – Foot Grounders Resistive Characterization
• Garments – ANSI/ESD STM2.1 Garments
• Seating – ANSI/ESD STM12.1- Seating – Resistive Measurement
• Floor/Footwear – ANSI/ESD STM97.1 – Floor Materials and Footwear- Resistance Measurement in Combination with a Person

A Compliance Verification Plan shall be established to ensure the Organization’s fulfillment of the technical requirements of the ESD Control Program Plan. Process monitoring (measurements) shall be conducted in accordance with a Compliance Verification Plan that identifies the technical requirements to be verified, the measurement limits, and the frequency at which those verifications shall occur. The Compliance Verification Plan shall document the test methods and equipment used for process monitoring and measurements. If the test methods used by the Organization differ from any of the standards referenced in this document, then there must be a tailoring statement that is documented as part of the ESD Control Program Plan. Compliance verification records shall be established and maintained to provide evidence of conformity to the technical requirements. The test equipment selected shall be capable of making the measurements defined in the Compliance Verification Plan.

Resistance Pro Meter Kit Features and Attributes:

• Large OLED Display – Displays resistance mantissa and exponent, temperature, relative humidity, and test voltage
• Internal Memory – Stores and recalls up to 100 measurements. Captures resistance, temperature, humidity, and test voltage
• Measurement Stability Modes – Sets the 15-second electrification period for test requirements
• Electrode Spacers – Spaces the 5 lbs. electrodes to 10 and 36 inches for resistance point-to-point (Rtt) measurement requirements of ANSI/ESD S.1 and ANSI/ESD S4.1
• Measurement Location Labels (Pack of 25) Labels and tracks areas and materials measured for surface resistance
• Digital Compliance Verification Surface Resistance Meter Kit – Measures resistance point-to-point (Rtt) and resistance-to-ground (Rtg) of worksurfaces, flooring systems, garments, packaging, and other materials in accordance with ESD Association documents: ESD TR53, ANSI/ESD S4.1, ANSI/ESD S7.1, ANSI/ESD STM97.1 and others
• Resistance Range: 1.0 x 10E3 to 1.0 x 10E12 Ohms – Determines if a surface is conductive, dissipative or insulative for ESD control applications in electronics manufacturing or handling environments
• Under Load Test Voltages (10V or 100V ±5%) – Meets ANSI/ESD S20.20 resistance testing requirements for product qualification and compliance verification
• 770007 Concentric Ring Probe Accessory (sold separately) – Measures surface resistance per ANSI/ESD STM11.11 and volume resistance per ANSI/ESD STM11.12 of planar material
• 770765 Handheld Electrode Accessory (sold separately) – Meets resistance measurement requirements of TR53, ANSI/ESD STM97.1 and other documents
• NIST Calibrated with Certificate Included – Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology.
• Made in the United States of America