Transforming Technologies GK2000 – ESD Floor Mat Grounding Kit

• Includes 15ft low profile ground cord, and a 10mm universal snap that can work with male or female snaps
• Can be installed with a Philips head screw driver.
• Standard ANSI ESD S20.20
• Cord length: 15′
• Snap type is a both male stud and female socket

Kit includes everything needed to ground ESD floor matting.

The GK2000 Floor Mat Ground Kit offers the hardware required by ANSI/ESD S-6.1 and ANSI/ESD-S20.20 to ground an ESD floor mat. The Ground Kit comes with a the FM1515 molded low profile ground cord with mushroom cap and a CS1090 Universale Snap Kit that ensures secure connection to floor mats. Quickly and easily install a snap into the mat with the 3/8″ (10mm) universal snap kit. The CS1090 installs in the mat with a screw driver and comes with two screw lengths for thicker materials. The ground cord snaps to the mat, and connects to ground (typcailly the center screw of an outlet) via a #10 ring terminal. Meets or exceeds requirements of ANSI ESD-S20.20 and ANSI/ESD S-6.1. ESD Standards require 1 ground point per mat or every 10ft of ESD matting.