Desco Statfree HJ Mats – Dissipative Dual Layer Rubber Mats

• Dissipative dual layer ESD worksurface
• Provides a worksurface that does not generate a static charge
• Will control the discharge rate from all conductors (including ESD susceptible items) that are placed on the surface
• ***Worksurfaces mats must be properly grounded to remove ESD charges***
• Abrasion resistant rubber compound

Desco Statfree HJ rubber mats provide a dissipative dual layer ESD worksurface and are available in several sizes and colors. These mats do not generate a static charge and will control the discharge rate from all conductors (including ESD susceptible items) that are placed on the surface. (Worksurfaces mats must be properly grounded to remove ESD charges.)

Features include:

• NEW Abrasion Resistance Rubber Compound
• Increased hardness (80 to 90 Type A) for greater resistance to abrasion, cuts, stretching and tearing. May be used in soldering applications with flux and other chemicals.
• Due to the increase hardness of the Statfree HJ material trimming or cutting the material may be difficult.
• Dissipative (1 x 10⁶ to <1 x 10⁹ ohms Rtt) Top Layer
• Meets ANSI/ESD S20.20 worksurface required limit and recommendation of ANSI/ESD S4.1 for contact with ESD susceptible items.
• Conductive (<1 x 10⁶ Rtt) Bottom Layer – Limited Lifetime Warranty
• Reduces the resistance to ground (Rtg) from the top of the surface to the groundable point ground and allows the material to be used with ESD workstation monitors.
• Laser Engraved With ESD Protective Symbol, Specs, and Manufacturer Information
• Identifies ESD protective product for control & auditing purposes.
• Additional lot coding information is marked on the bottom (black conductive) side of the material.
• Lead-free RoHS compliant