Adash America A4300 AZ – Analyzer Module

Adash America A4300 AZ – Analyzer Module

The Analyzer mode is the basic mode for signal analysis. If you have not prepared the Route readings, then you use the Analyzer mode for analysis. All required parameters must be set manually or you can use the predefined parameters from memory.

The Meas – The Meas means one reading (measurement) as it is usually understood, e.g. overall value or time signal or spectrum or other.

The Graph – The graphical form of the reading displayed on the screen is called the Graph (overall value, time signal, spectrum, orbit, order analysis). One Graph works with data from one reading. You should keep in mind that one overall value is also the Graph.

The Set – The Set is the most important term in the Analyzer mode. The Set is the set (group) of one or more readings, which the user wants to take and display together. E.g. you want to take 4 readings together – overall acceleration, overall velocity, velocity time waveform and velocity spectrum. You prepare the Set, which includes these 4 required readings. The definition of Set is saved in the Analyzer memory. You can save many various Sets, which can contain your often used sets of readings. Then you select one Set and run it. The taking off all readings included in the set is made simultaneously. See also Virtual Analyzers section for better understanding.

New Set – Select the New Set and press OK. Enter the name and confirm by pressing OK. Use the Shift (F1) to change the keyboard function (abc, ABC, 123, <->). The last choice <-> enables to move in text by arrows and to delete characters (buttons 7 and 9). Press the Cancel button to cancel the New Set procedure (when the option <-> is on, otherwise the Cancel button is not available). When you do not enter the name of set and press OK, the procedure is cancelled as well.

Analyzer menu – The first Analyzer screen contains the list of Sets saved in the memory (e.g.BASE1, BASE2, BASE3) or the empty list, when no Sets were created. The main analyzer menu enables to handle with sets.