BW M5-XU0Y-A-D-D-Y-N-00 GasAlertMicro 5, % LEL (unfiltered), O2, H2S, CO, Alkaline Batteries, Yellow Housing

GasAlertMicro 5 Series

Compact and lightweight, GasAlertMicro 5 Series instruments are available in diffusion or pumped instruments. The portable gas detectors simultaneously monitors and displays up to five potential atmospheric hazards. The GasAlertMicro 5 PID model also identifies PID detectable VOCs, while the GasAlertMicro 5 IR uses an NDIR sensor to monitor CO2 levels. Adaptable to a variety of applications, GasAlertMicro 5 Series instruments have an extensive selection of user-settable field options. Use the passcode function to prevent unauthorized modifications of the instrument’s settings. Compatible with BW’s MicroDock II automatic test and calibration system, GasAlertMicro 5 Series instruments are unparalleled in their versatility, performance and overall value.

Providing protection from up to five potential atmospheric hazards including oxygen, combustible and toxic gases, GasAlertMicro 5 is unparalleled in its versatility, capability and overall value. BW Technologies by Honeywell’s newest addition to its water-resistant line of portable gas detectors has transformed the market with its matchless array of features.

Continuously monitoring and displaying concentrations of up to five gases, the compact and lightweight GasAlertMicro 5 was designed and engineered with an extensive host of applications in mind.

Additional Features:

• Integral concussion-proof boot
• Optional integral motorized pump option for remote sampling
• Powered by three AA alkaline batteries or a hot-swappable rechargeable battery pack
• Triple alarms (audible, visual and vibrating)
• Multi-language support in English, French, German, Spanish and Portuguese
• Large, user selectable backlit LCD
• Four alarm levels: Low, High, TWA and STEL
• Compatible with MicroDock II Automatic Test and Calibration Station
• Datalogging models store and recall event information
• Wide range of user selectable field options including password protection, safe and stealth modes.

Self-Tests

• Full function self-test confirms sensor, battery and circuitry integrity and audible/visual alarms on activation

GasAlertMicro 5 M5-XU0Y-A-D-D-Y-N-00

Smaller and 50% lighter than competitive instruments, this portable, multi-gas detector delivers a high-level of protection wherever it’s needed.

Simultaneously monitor and display up to five atmospheric hazards with the GasAlertMicro 5. Adaptable to a variety of applications, the GasAlertMicro 5 has an extensive selection of user-settable field options and is available as either a standard toxic gas model, a PID model for the detection VOCs, or an IR model for CO2 detection. Use the passcode function to prevent unauthorized modifications of the instrument’s settings. Compatible with BW’s MicroDock II automatic test and calibration system, the GasAlertMicro 5 is unparalleled in its versatility, performance and overall value.

• Measure up to five atmospheric hazards concurrently
• Fully customizable to suit any application
• Rapidly switch from diffusion mode, to the optional integrated pump in the field

Features & Benefits

• Monitors VOCs (PID), H₂S, CO, O₂, SO₂, PH₃, CI₂, NH₃, NO₂, HCN, CIO₂, O₃ and combustibles
• Water-resistant
• 0 -1000 ppm measurement of VOCs (Volatile Organic Compounds)

Standard features of BW products

• Continuous LCD shows real-time gas concentrations
• Water-resistant
• Automatic calibration procedure; compatible with BW MicroDock II automatic test and calibration station
• Full function self-test of sensor, battery status, circuit integrity and audible/visual alarms on start up
• Bright wide-angled visual alarm bars
• Built-in concussion-proof boot

Additional GasAlertMicro 5 Features

• Integral motorized pump option for remote sampling
• Equipped with internal vibrating alarm for high noise areas
• Two power options: AA alkaline or rechargeable hotswappable battery packs
• Multi-language support in English, French, German, Spanish and Portuguese

GasAlertMicro 5 Display Elements

How to Replace a Sensor

1. With detector OFF, use No. 1 Phillips screwdriver to remove  2 screws (G) from back enclosure (F) on either side of the belt clip
2. Lift diffusion cover (A) or pump module straight up
3. Remove sensor (O-R) by pulling straight up from PCB (E)
4. Insert new sensor (O-R) into PCB (E)
5. Replace diffusion cover (A) or pump module
6. Replace 2 screws (G) in back enclosure (F) and  hand-tighten until firm

How to Replace the Sensor Screen

1. With detector OFF, use No. 1 Phillips screwdriver to remove  2 screws (G) from back enclosure (F) on either side of the belt clip
2. Lift diffusion cover (A) or pump module straight up
3. Remove sensor screen (B) by pulling it straight up from diffusion cover (A) or pump module
4. Insert sensor screen (B) into diffusion cover (A) or  pump module
5. Replace diffusion cover (A) or pump module
6. Replace 2 screws (G) in back enclosure (F) and  hand-tighten until firm