Desco Statshield Smock – Jacket with Convertible Sleeves

• Static control garment
• Jacket with convertible sleeves
• Roll-up sleeve design features button-tab holders for a relaxed feel
• Creates a faraday cage effect to shield charges generated by operators clothing from ESDS devices
• Point to Point Resistance < 1X 10¹¹ ohms per the required limits of ANSI/ESD S20.20-2014 Convertible Sleeves

Desco Statshield Smocks with Convertible Sleeves are designed to be antistatic, low tribocharging, and create a Faraday Cage around the torso and arms of the wearer to protect ESD susceptible items from electrostatic fields generated by clothing on the operator’s clothing. Static control garments are intended to attenuate electrostatic fields that may be present on personnel clothing. Statshield Smocks meet the requirement for Groundable Static Control Garment System per ANSI/ESD S20.20 required limit of < 3.5 x 10⁷ ohm Rtg tested per ANSI/ESD STM2.1 and ESD TR53 (23° ± 1° C, 12% ± 3% RH, and 50% ± 5% RH).

Additional Features:

• Panel To Panel Conductive – Rtt: 1 x 10⁹ ohms tested per ESD TR53
• Minimum 9% carbon conductive nylon fibers woven in chain-link design
• Provides continuous and consistent charge dissipation
• 2-year/100 launderings limited warranty

Statshield smocks are constructed of a lightweight dissipative material which made from texturized polyester and a minimum of 9% carbon nylon monofilament. The conductive nylon fibers are woven in a chain-link design throughout the material, providing continuous and consistent charge dissipation. All of the seams in Statshield smocks are designed to maintain electrical continuity from panel to panel and from sleeve to sleeve in accordance with the ESD Association Garment Standard, ESD-STM2.1.

Desco jackets with convertible sleeves are available in ten sizes, as well as multiple colors. The chart below details measurements for each.

Panel-to-panel conductivity is essential so as not to leave portions of the smock as isolated charged conductors. Panel-to-panel conductivity can be tested using the Surface Resistance Meter Kit. For additional information, refer to ANSI/ESD S20.20, ESD TR20.20, ESD TR53 and the Garment Standard, ANSI/ESD STM2.1.