Digilent Hi Speed Adap Logic Pr – Digital Discovery High Speed Adapter and Logic Probes

• Alternative to the 2×16 flywire assembly for the Digital Discovery
• High Speed Adapter provides increased sample rates of up to 800 MS/s on the Digital Discovery
• Ships with 16 High Speed logic Probes

The High Speed Adapter, for the 32-pin connector on the Digital Discovery, is an alternative to the 2×16 flywire assembly. It provides access for up to 24 High Speed Logic Probes and allows increased sample rates for up 800 MS/s on the Digital Discovery. The adapter is not keyed, and both orientations can be used as the twisted wires are not color-coded.

The Digital Discovery comes with a pack of 16 High Speed Logic Probes. Each cable has a GND (black) wire twisted to a DIN_USR (colored) wire. The wires connect to the High Speed Adapter via a 2-pin female header and two 1-pin female connectors to the device under test. A 100 Ω resistor is embedded in the signal wire on the end closest to the device under test. All GND wires should be connected to the ground of the device under test.