Fluke 113 – Utility Multimeter

• Includes features needed for most electrical repair problems
• Displays AC or DC voltage
• Meets CAT IV 600V standards for a higher level of safety
• VCHEK LoZ low impedance measurement function to simultaneously test for voltage and continuity
• This meter does not measure current

The Fluke 113 Digital Multimeter gives users the means to quickly and easily do basic testing. It is easy to use and is packed with the features needed to repair most electrical problems. The 113 features a large, backlit display for easy visibility in low-lit work environments. Plus, the integrated holster includes probe holders on the back, so your test leads can always be kept organized and where you need them.

Whether you’re a utility worker, linesman, electrician, technician, or anyone else working with basic electrical testing, the Fluke 113 includes the measurement features you need to tackle your job. The Fluke VCHEK LoZ low impedance measurement function enables users to perform tests for voltage or continuity from the same dial position.

Please note that low impedance LoZ measurements will cause a low load on a circuit protected by an RCD, which will trip powered GFCI and RCD circuits when measuring Phase to Earth.

The meter also displays AC or DC voltage, depending on what was detected, while also rejecting ghost voltages from adjacent wires. If no voltage is detected, a continuity test is performed. The Min/Max function lets you record signal fluctuations.

The Fluke 113 digital multimeter can perform diode tests and also provides both auto and manual ranging capabilities. With features such as conformance to the latest safety standards, a backlight, and a much larger display that’s easier to view, this meter is a must-have for every toolbox.

Fluke offers several meters in its 110-meter series. The charts below outline several main differences in each.

In this chart,

• VoltAlert refers to non-contact voltage detection
• VCHEK is a LoZ low impedance measurement function to simultaneously test for voltage/continuity
• LoZ is a Low input impedance measurement to prevent false readings due to “ghost voltage”

To view additional selection information on the 110 series, please click here.

To view the selection information for the Fluke digital multimeter product line, please click here.