No products in the cart.
Menu
Categories
Fluke 789 Process Meter with 250 Ohm HART Resistor
25 people are viewing this product right now
$1,389.14
Shipping calculated at checkout.
Estimated delivery:3 days
Fluke 789 ProcessMeter with HART Communications/Diagnostics
- 24 V Loop power supply
- Very large dual display
- Enhanced backlight with 2 brightness settings
- 1200 Ohm drive capability on mA source
- HART mode setting with loop power and a built-in 250 ohm resistor
- 0% and 100 % buttons to toggle between 4 and 20 mA sourcing for a quick span check
- Externally accessible fuses for easy replacement
- Infrared-port to process data in FlukeView Forms (V2.1) software
- Precision 1000 V, 440 mA True-RMS digital Multimeter
- DMM designed to meet 1000 volt IEC 1010 CAT III standards
- Frequency measurement to 20 kHz
- Min/Max/Average/Hold/Relative modes
- Diode Test and Continuity Beeper
- Simultaneous mA and % of scale readout
- 20 mA DC current source / loop calibrator / simulator
- Manual Step (100%, 25%, Coarse, Fine) plus Auto Step and Auto Ramp
- Externally accessible battery for easy battery changes
Guarantee Safe and Secure Payment Checkout
Description
Fluke 789 – Process Meter with 250 Ohm HART Resistor
- 24 V Loop power supply
- Very large dual display
- 1200 Ohm drive capability on mA source
- Fluke Connect Compatibility
- HART mode setting with loop power and a built-in 250 ohm resistor
The Fluke 789 processmeter is a noticeable improvement over the previous generation 787. Featuring a more intuitive and user friendly design, the 789 also has a display that is approximately twice the size of the 787. The redesigned display is also much brighter with two levels of background lighting options. This makes it adaptable to both bright and dark working environments. The externally accessible AA alkaline batteries last a typical 140 hours in measurement mode and are easy to change in the field. So, let this powerful two in one multimeter be the only tool you need.
Digital Multimeter Functionality
The digital multimeter functionality of the 789 is a powerful tool suitable for a variety of applications. It is rated at 1000 V, 440 mA including features such as True-RMS, diode testing and a continuity beeper. The integrated multimeter is designed to meet 1000 volt IEC 1010 CAT III standards.
2-in-1
The Fluke 789 has a 24-Volt loop supply reducing the need for taking a separate power supply when doing offline transmitter testing. As with the 787, the 789 combines a loop calibrator and a digital multimeter into a single instrument. New for the 789 is the addition of an integrated 250 ohm HART® resistor. By adding the integrated resistor, Fluke has eliminated the need to also carry a stand-alone resistor around a job site.
Process / Calibration/Multifunction Calibrators Template | |
|---|---|
| Type | Hand Held |
| Measure Voltage | Yes |
| Simulate Loop Voltage | No |
| Voltage Measurement Max | 1000 V |
| Voltage Measurement Min | 0.1 mV (0.0001 V) |
| Source/Simulate DC Current | Yes |
| Measure DC Current | Yes |
| Current Measurement Max | 1 A (1000 mA) |
| Current Measurement Min | 1 mA |
| Source/Simulate Resistance | No |
| Measure Resistance | Yes |
| Resistance Measurement Max | 40 M Ohms (40000000 Ohms) |
| Resistance Measurement Min | 0.1 Ohms |
| Source/Simulate Frequency | No |
| Measure Frequency | Yes |
| Frequency Measurement Max | 20 kHz (20000 Hz) |
| Frequency Measurement Min | 0.5 Hz |
| Measure RTD | No |
| Measure Thermocouples | No |
| Source/Simulate Pressure | No |
| Pressure Modules Available | No |
| Hart Compatible | No |
| FieldBus Compatible | No |
| Backlighted | Yes |
| Graphical Screen | No |
| Intrinsically Safe(Calibrators) | No |
Product General Attributes | |
| Unique Features | 789 ProcessMeter combines a loop calibrator with a DMM. 24 V Loop power supply. DMM designed to meet 1000 volt IEC 1010 CAT III standards. Infrared I/O serial port compatible with FlukeView® Forms Software. |
| Warranty | 3 YEARS |
| Safety Approval | CSA |
| Product Weight | 2.56 LBS |
| Product Height | 2.99 IN |
| Product Length | 9.02 IN |
| Product Width | 5.98 IN |
| Data Logging | No |
| Battery Type | AA |
| Power Supply Voltage | Battery Powered |
| Country of Origin | United States |
| UPC | 095969112192 |
You must be logged in to post a review.
Manuals/Guides
ManualsSpec SheetsApplication NotesComparisonOther
| Weight | 2.56 lbs |
|---|---|
| Dimensions | 9.02 × 5.98 × 2.99 in |
Related products
Rohde & Schwarz NRPC-LS – RF-Power Linearity Standard (Catalog 1421.7004.02)
SKU: Rohde & Schwarz NRPC-LS $32,390.00
Fluke 725/FPC – 725 Multifunction Process Calibrator with 1 Year Premium Care Standard
SKU: Fluke 725/FPC $4,451.99
Fluke 789 Process Meter with 2... $1,389.14
Our team of knowledgeable professionals is here to help you make informed decisions. Whether you need product recommendations, technical support, or guidance on your purchase, we're just a click away.
Contact Us Now:
📧 sales@nestesinstruments.com
📞 +1 (833) 763-7837
Let us assist you in finding the perfect solution!
Contact Us Now:
📧 sales@nestesinstruments.com
📞 +1 (833) 763-7837
Let us assist you in finding the perfect solution!
Reviews
There are no reviews yet.