Pace ADS200E – Soldering Station with Instant Set Back Stand and 3 Tips (8007-0594); 230 VOLT VERSION

• ***230 VOLT VERSION – only available for shipment to North or South America***
• For the 120 volt model, please see part number 8007-0593
• Package with Instant Set Back (ISB) stand and the following three tips:
• 1130-0001-P1 (1/32″, 0.80mm conical sharp extended)
• 1130-0012-P1 (1/32″, 0.80mm 30 degree chisel)
• 1130-0019-P1 (1/16″, 1.59mm 30 degree chisel)

Please note – this model is the 230 volt version and can only be shipped to North or South America. For the 120 volt model, please see part number 8007-0593.

PACE’s ADS200 is a high power (up to 120 Watts), yet low-cost professional soldering station for serious cell-phone repairers, electronics techs, engineers, DIYers & production solder techs. It features the groundbreaking TD-200 Tip-Heater Cartridge Soldering Iron, with its sleek and ergonomic aluminum handle designed to stay cool and comfortable during continuous production soldering. An Instant Setback (ISB) Tool Stand is included which automatically lowers the temperature when the TD-200 is placed in the stand, greatly increasing tip life as well as saving energy. Blue Series Tip-Heater Cartridges integrate a high accuracy sensor with a robust heater, delivering up to 120 Watts of pure power.

At the heart of the ADS200 lies PACE’s new AccuDrive temperature control technology, which delivers unsurpassed thermal performance and highly accurate temperatures, without the need to change tip cartridges or calibrate. Its advanced electronics provide instantaneous load sensing and on-demand power to quickly reflow solder joints at the lowest, safest temperature required, regardless of the mass of the application. Intended for extreme, multi-shift production use, the ADS200 features a rugged, all-metal design, including housing, soldering iron and tool stand. The system is intuitive and easy to operate – just power it on, set the temperature with arrow keys and start soldering. No training required.

Beneath its sleek dimensions, comfortable ergonomics and cool touch, the TD-200 makes continuous production soldering effortless. With an ultra-short tip-to-grip (1.9″/48mm) and comfortable ergonomic design, the TD-200 dramatically reduces grip stress and operator fatigue, while delivering precision operator dexterity, especially when used under a magnifier or microscope. The TD-200’s aluminum Cool Touch™ handle stays cool and comfortable even during extended production use. And with PACE’s new AccuDrive heating technology, this iron provides accurate tip temperatures, heat-up/recovery, and high-capacity heating – all at safe low temperatures.

• Inexpensive Cartridges
• Less than half the price of most cartridge style or curie point tips, delivers lowest cost of ownership.
• One Tip Geometry, Any Temperature
• Unlike with curie point tips, select any temperature for a chosen tip cartridge without having to buy additional ones.
• Accurate, Honest Temperatures
• Consistent, accurate tip temperatures meet or exceed J-STD-001 requirements.
• High Capacity Integrated Heater
• Delivers up to 120 Watts of pure power
• Superior Heat Transfer/Delivery
• Allows for safer, lower temperatures, reduces risk of PCB damage and improves tip life.
• Hot-Swappable Quick-Change Tips
• Fast & easy change-out within 2 seconds, without turning the unit off.
• Fast Initial Heat-Up
• Achieves set temperatures in seconds.
• Wide Variety of Tip Geometries Available
• For the most delicate of micro-soldering to challenging, high thermal mass applications