WooCommerce Themes

Need help? Call us:

+1 (833) 763-7837

Menu Categories

PIECAL 820 Single Channel Multifunction Process Calibrator

Brand:
16 people are viewing this product right now

$2,999.00

Shipping calculated at checkout.
or
Add to quote
Estimated delivery:3 days

Multifunction single channel calibrator. Comes with rubber boot, hands free carrying case, test leads and NIST cert.

  • Lighten up your toolbox
    • Pocket sized calibrator replaces toolbox of single function devices
    • Milliamp • Voltage • Frequency
    • Thermocouples • RTDs • Check Continuity
  • Technician friendly operation
    • Intuitive EZ-DIAL Double Click Menu makes it easier to setup than other multifunction calibrators. Uses the same menus as the single function PIECAL Evolution Calibrators.
  • Use it as a milliamp and voltage calibrator
    • Source 0 to 24.00 mA, 0 to 10.25 V dc and -10.00 to 110.00 mV Read to 24.00 mA, ±60.00 V dc and and -10.00 to 110.00 mV Simulate 2-Wire Transmitters
    • Power up transmitters & loops with the built-in 24 V power supply. Simplify HART hookups with built-in 250 Ohm resistor
  • Calibrate directly in temperature (°C & °F)
    • The PIECAL 820 works with the instruments you use.
    • Types J, K, T, E, R, S, B, N, G, C, D, L (J DIN), U (T DIN) and P (Platinel II)
    • Pt 100 Ohm (3850, 3902, 3916, 3926) & 1000 Ohm (3850) Copper 10 & 50 Ohm, Nickel 100 and 120 Ohm
  • Checkout flow and vibration systems
    • Source & read frequency to 2000 CPM (Counts-Per-Minute), 999.00 Hz, 9999.9 Hz, 9.9999 kHz & to 20.000 kHz
  • Troubleshoot loop & wiring problems
    • ‘Beep’ out connections with the built-in continuity checker
  • Easy to read
    • Turn on the backlight & easily see the display in dark areas of the plant
  • Quickly set any three outputs plus automatic stepping & ramping
    • Easily set any value quickly with the adjustable “DIAL” plus store any three output settings for instant recall with the EZ-CHECKâ„¢ switch. Choose between 2, 3, 5 & 11 steps to automatically increment the output in 100%, 50%, 25% or 10% of span. Select RAMP to smoothly increase and decrease the output between Zero and Span. Set step/ramp time to match your system from 5, 6, 7, 8, 10, 15, 20, 25, 30 and 60 seconds.
  • Measure temperature sensors, frequency pickups, loop currents and voltage levels
    • Check the values of your process sensors. Instantly recall MAX and MIN values to see process variability
Pay safely with Visa Pay safely with Master Card Pay safely with PayPal Pay safely with Maestro Tooltip text
Guarantee Safe and Secure Payment Checkout

Description

The new PIECAL 820 is smaller and easier to use than other multifunction calibrators. Six single function calibrators with advanced features are squeezed into a single surprisingly small package that fits into a pocket.

This technician friendly calibrator is all about ease of use. An intuitive EZ-DIAL Double Click Menu makes it simpler to setup than larger calibrators with their complicated button filled panels and confusing menus. Use the PIECAL 820 right out of the box instead of wasting time learning to use more complex calibrators.

The PIECAL 820 Process Calibrator combines all milliamp loop functions and sources and reads DC Volts and millivolts, 14 thermocouple types, 9 RTD curves, ohms and process frequency signals. For troubleshooting connections it has a continuity tester with tone. All ranges have auto storing MIN/MAX readings and three output set points for fast calibration of zero, midpoint and span. Advanced features include automatic detection of 2, 3 and 4 wire RTDs plus configurable automatic stepping and ramping. A LED flashes green for frequency sync and lights up red for signal overload and invalid signal conditions.
 
The toolbox tough design includes a backlit display for use in dark environments, protective rubber boot with built in stand, hands free carrying case and test leads. NIST Calibration Certificate and three year warranty are included at no extra cost. Optional six year extended warranty is available for low total cost of ownership. Or choose the 3 year replacement warranty and eliminate unbudgeted expenses when the calibrator is used where equipment is regularly damaged.
 
The PIECAL 820 is the best value multifunction calibrator combining ease of use, accuracy, signal compatibility and compact size to make calibration as easy as pie!

Advantages of the PIECAL 820 over the Altek 820

820_image_4
  • Automatic stepping & ramping
    Setup 2, 3, 5 & 11 steps or continuous ramp from 5 to 60 seconds to match your test procedures
  • Larger Display with Backlight
    Easy viewing in dark locations
  • More Resistant to Accidental Damage
    Rubber Boot and Stronger Switches
  • More Thermocouple & RTD ranges with 0.1° resolution and better accuracy
    Compatible with smart transmitters, multichannel recorders, PLCs and DCSs
  • Smaller & 25% lighter
    Pocket sized and easier to carry
  • LED for optical pickups
    LED flashes green in synch with frequency output. Illuminates red for overload conditions.
820_image_5

Process / Calibration/Multifunction Calibrators Template

TypeHand Held
Measure VoltageYes
Loop Voltage Min2 V
Simulate Loop VoltageYes
Loop Voltage Max60.0 V
Voltage Measurement Max60.0 V
Voltage Measurement Min0.01 mV (0.00001 V)
Measure DC CurrentYes
Current Measurement Max24.00 mA
Current Measurement Min0.0 mA
Source/Simulate ResistanceYes
Measure ResistanceYes
Resistance Measurement Max4010 Ohms
Resistance Measurement Min0.0 Ohms
Source/Simulate FrequencyYes
Measure FrequencyYes
Frequency Measurement Max20.000 kHz (20000 Hz)
Frequency Measurement Min0.001 Hz
Measure RTDYes
Measure ThermocouplesYes
Source/Simulate PressureNo
Pressure Modules AvailableNo
Hart CompatibleNo
FieldBus CompatibleNo
BacklightedYes
Graphical ScreenNo
Types RTD/Thermocouples AcceptedB, C , E, J, K, L, N, R, S, T, U 

Types RTD/Thermocouples Accepted

Type P, D, and G (W) also included

Intrinsically Safe(Calibrators)No

Product General Attributes

Unique FeaturesThe PIE 820 Multifunction Calibrator combines is a Pocket sized calibrator which replaces toolbox of single function devices including Milliamp, Voltage, Frequency, Thermocouples, RTDs, Check Continuity at a very affordable price.
Warranty3 YEARS
Warranty DetailsThree years of protection from any defects in materials or workmanship.
Safety ApprovalCE
Product Weight12.1 OUNCES (0.756 LBS)
Product Height1.60 IN
Product Length5.63 IN
Product Width3.00 IN
Data LoggingNo
HTS/Schedule B Number9030.39.0100
ECCN Number3A992
Calibration IncludedFactory Calibration, NIST Calibration
Battery TypeAA, NimH
Power Supply VoltageBattery Powered
Country of OriginUnited States

Reviews

There are no reviews yet.

Be the first to review “PIECAL 820 Single Channel Multifunction Process Calibrator”

Manuals/Guides

Weight12.1 lbs
Dimensions5.63 × 3 × 1.6 in
PIECAL 820 Single Channel Mult...

$2,999.00

Our team of knowledgeable professionals is here to help you make informed decisions. Whether you need product recommendations, technical support, or guidance on your purchase, we're just a click away.

Contact Us Now:
📧 sales@nestesinstruments.com
📞 +1 (833) 763-7837


Let us assist you in finding the perfect solution!
Have Questions? Ask an Expert!