Rohde & Schwarz FPL1007-TG – Spectrum Analyzer Package (5 kHz to 7.5 GHz, B4 OCXO, B5 Interfaces, B9 Internal Generator, B22 Pre-Amp, B25 Electronic Step Attenuator)

• Special package with spectrum analyzer and preinstalled options
• Options include B4 OCXO reference frequency, B5 Interfaces, B9 Internal Generator, B22 Pre-Amp, B25 Electronic Step Attenuator
• Frequency range: 5 kHz to 7.5 GHz
• Scalar frequency response measurement
• Signal analysis of analog and digitally modulated signals

Note: This is a special package with the following options preinstalled: B4, B5, B9, B22, B25. See the TG Package section below for further details.

In an RF lab, the R&S FPL1000 is as indispensable as an oscilloscope or multimeter. It is a single measuring instrument for a variety of measurement tasks. It supports not only spectrum analysis, but also highly accurate power measurement with power sensors and analysis of analog and digitally modulated signals.

The R&S FPL1000 is the only instrument in its class that features (optionally) an internal generator up to 7.5 GHz (R&S FPL1-B9 option) and can analyze signals with a bandwidth of 40 MHz (R&S FPL1-B40 option, for frequencies above 6 GHz the R&S FPL1-B11 option is required).

The solid RF performance makes the R&S FPL1000 the ideal instrument for labs, test houses, production, and service. The 1 dB attenuator step size (R&S FPL1-B25 option) allows measurements at the instrument’s maximum dynamic range. The preamplifier (R&S FPL1-B22 option) extends the sensitivity level. Thanks to its high sensitivity and low phase noise performance, even small interfering signals next to the carrier can be analyzed.

The R&S FPL1000 is as intuitive as a smartphone. Simple swiping gestures adjust the center frequency or the reference level. Two-finger gestures change the span or the displayed power level, while the 10.1″ screen with 1280 × 800 pixel resolution provides a clear image of the signal. The user can freely arrange the layout of the measurement results on the display. In the MultiView display mode, different measurement modes can be combined and all the results displayed on one screen.

The R&S FPL1000 has a depth of only one hand length. It fits into any workplace and leaves enough space for DUTs and other measurement instruments.

Its light weight and battery operation let you take the instrument anywhere for measurements. The optional battery pack provides three hours of operation and the rich set of accessories make the R&S FPL1000 suitable for field measurements. A protective hard cover is available for transport and a padded carrying bag that allows the instrument to be operated in it. A shoulder harness simplifies portable operation.

B4 OCXO High-Precision Reference Frequency: This option generates a 10 MHz reference signal with a very precise frequency. If installed and if no external signal is used, this signal is used as an internal reference. It can also be used to synchronize other connected devices via the Ref. Out 10 MHz connector.

B5 Additional Interfaces: This option adds interfaces for Video out, IF out, noise source control, AUX port, and a connector for NRP power sensors.

B22 Pre-Amplifier: This option extends the sensitivity level. High sensitivity and low phase noise performance allow even small signals next to the carrier to be analyzed.

B25 Electronic Step Attenuator: An attenuation step size of 1 dB allows measurements at the instrument’s maximum dynamic range.

The FPL1000 series spectrum analyzers are available in several versions, differing primarily in frequency range. Please note that max analysis bandwidth can only be met with the purchase of option FPL1-840.

You can use the R&S FPL1000 for spectral measurements, highly accurate power measurements with power sensors, and when analyzing analog and digitally modulated signals. The standard base unit supports various advanced spectrum measurement modes.

Featuring a phase noise of -108 dBc (1 Hz) at 10 kHz offset (1 GHz carrier), a third-order intercept point of +20 dBm, 1 Hz to 10 MHz resolution bandwidth and -166 dBm displayed average noise level, the R&S FPL1000 is comparable to higher class analyzers. This makes it ideal for labs, production, and servicing. The 1 dB attenuator step size (R&S FPL1-B25 option) and the preamplifier (R&S FPL1-B22 option) extend the usable dynamic range and sensitivity.

The 10.1″ screen with 1280 × 800 pixel resolution provides a precise representation of the signal. The soft menu keys and the information fields are arranged so that the signal appears true to detail with the highest possible resolution.

Within a measurement application, different measurement items can be easily added using drag and drop. The combined results can be arranged as desired on the display.

Battery Pack FPL1-B31: Li-Ion battery pack for internal battery slot, includes charging unit, charges by 110/240 V AC or optional 12/24 V DC supply (FPL1-B30, sold separately from FPL1-31).

Soft Carrying Bag for Transport and Outdoor Operation FPL1-Z2: Ventilation slits and a transparent cover allow the instrument to be operated while inside the bag. Lets you use the R&S FPL1000 at any location and under adverse environmental conditions.

H-style Shoulder Harness FPL1-Z3: For use with FPL1-Z2 soft carrying bag.

Note: HE400 antenna handle and antenna module shown in image are sold separately.