×

R&S Scope Rider Handheld Digital Oscilloscope

Superior Performance

• Package RTH1002 Field Memory Promotion
• 60 MHz to 500 MHz with  5 Gsample/s sampling rate
• 50 000 waveforms per second
• 10-bit A/C converter
• 2 mV/div to 100 V/div
• Up to 200 V offset range
• 33 automatic measurement functions

5 Instruments in one Handheld Package

• Lab performance oscilloscope
• Logic analyzer
• Protocol analyzer
• Data logger
• Digital multimeter ^{(1)
  (1)}  Additional multimeter channel in two-channel model.

Capacitive Touch and Keypad Operation

• Full operation via touch panel or keypad
• See more with a 7″ color display
• Easy parameter adjustment with multifunction wheel
• Large buttons for use with gloves

Outstanding Protection 

• Maximum safety in all environments: CAT IV 600 V/CAT III 1000 V
• IP51 housing that meets military  environmental requirements
• Nonslip and impact resistant  rubberized surface

Excellent connectivity and much more

• Wireless LAN and Ethernet for web-based remote control and quick data access
• Finish faster with one-touch documentation
• MicroSD card and USB device/host support
• More than 4 hours of battery power

Lab Oscilloscope Performance

Safe Measurements on Power Electronics

High-speed acquisition system with deep history: Never miss rare faults again

×

High-Speed acquisition system of the R&S Scope Rider

Oscilloscope, logic and protocol analyzer, data  logger and digital multimeter: With the power of  five instruments and dedicated operation modes  for XY operation, roll mode and mask testing, the  R&S®Scope Rider provides the capabilities and  the flexibility needed for debugging all kinds of  electronic systems.
 

× Logic Analyzer	Logic Analyzer Motor drive measurements often require up to four analog measurement channels with no channel free for monitoring digital control interfaces. The digital logic probe  (MSO) of the R&S®Scope Rider features eight additional  digital inputs for analyzing control signals, time-correlated  to the analog channel signals. With 250 MHz bandwidth,  1.25 Gsample/s sampling rate and configurable thresholds,  it adapts to almost any digital interface.
× Protocol Analyzer	Protocol Analyzer Protocols such as I 2 C, SPI or CAN/LIN are frequently used  for transferring control messages between integrated circuits. The R&S®Scope Rider is the first isolated handheld  digital oscilloscope with trigger and decode capability for  in-depth troubleshooting. Triggering on protocol events or  data enables selective acquisition of relevant events, data  and signals.
× Data Logger	Data Logger Sporadic sensor signal faults or rare glitches in a power  supply can cause complex system failures without any  obvious indication of the root cause. The long-term data  logger of the R&S®Scope Rider makes it possible to monitor up to four key measurements at a speed of 1, 2 or 5  measurements per second to uncover such rare failures.  The large memory of 2 Msample per channel allows more  than 23 days of log duration. The statistics display provides information about minimum and maximum values  with exact time.
× XY Operation Mode	XY Operation Mode Relative phases between two signals can be  easily   measured with the dedicated XY mode that also  shows the individual time signals.
× Mask Test Mode	Mask Test Mode The mask test mode shows pass and fail statistics and makes it easy to set up masks based on test signals.
× Digital Multimeter	Digital Multimeter The two-channel variant R&S®RTH1002 features a dedicated, isolated digital multimeter with 10 000 count resolution. Measurement functions include V DC, V AC, V AC + V DC, resistance, continuity and capacitance as well as current or temperature if suitable shunts are used.
The four-channel variant, RTH1004 features a digital voltmeter on each input channel. Statistics information shows minimum, average and maximum values with corresponding time stamps.

×

Capacitive Touch and Keypad Operation: Intuitive to use

• Full instrument control via touch panel or keypad
• Excellent readability and crystal clear signals: 7″, 800 × 480 pixel capacitive touch display
• Multifunction wheel for easy parameter adjustment
• Large keys for use with safety gloves

Wireless LAN or Ethernet: Easy remote control  within a web browser

Easy documentation of measurement results

Simplify your measurement documentation with documentation project directories on the microSD card or USB  flash drive. Screenshots, measurement results and settings files are saved with a single button press in the selected project directory. Data can be easily accessed and  downloaded using the web browser interface.

 
An integrated wireless LAN module  and web server allows easy remote  control of the R&S®Scope Rider. The  waveform display and user interface   of the R&S®Scope Rider are directly  available in the web browser; all settings can be changed on the screen.

With no software installation required,  the R&S®Scope Rider can be controlled  from almost every portable device  such as a laptop, a tablet or even a   mobile phone.
 

• Isolation of all analog input channels
• Rated for measurements in CAT III 1000 V/ CAT IV 600 V environments
• IP51 housing for harsh environments
• Nonslip and impact resistant rubberized surface

×

Overview of measurement categories CAT 0 to CAT IV