R&R Lotion FD-1-ESD – I.C. Flux Dispenser, ESD-Safe, 2oz, 26 Gauge Needle Tip

I.C. ESD Safe Flux Dispensers are designed to dispense flux safely and cleanly in any cleanroom environment. Surface resistivity of 10^9 to 10^10 Ω/sq, and an average static decay rate of 0.5 seconds at 40% RH guarantee ease of access into static-sensitive environments. While a stainless-steel needle-tip spout dispenses a precise and consistent supply of flux with no unnecessary resistance to the operator

Directions For Use:

Unfasten the nozzle from the base to fill the ESD bottle with flux. Tightly refasten the plug and draw the needle through the nozzle. Fasten the nozzle and squeeze to dispense flux.

Uses:

• For use in a cleanroom or sterile environment
• For use in dispensing flux onto circuit boards
• For use in storing flux or solvents

Applications:

Electronics Manufacturing, Cleanrooms, Static-Sensitive Environments

Workplace Certifications and Testing:

• Exceeds MIL-B-81705 & NFPA-56A “Electrostatic decay in accordance with Federal Test Standard 101, method 4046.”
• Tested to ESD ADV 11.21 surface resistance of Electrostatically dissipative materials between 1 x 10^4 and < 1 x 10^11
• Helps support the ESD control program requirements stated in ANSI/ESD S20.20.
• Meets EIA 625 triboelectric charge standards.
• Helps Meet ANSI/ESD S4.1
• DOD-HDBK-263 Military Spec Compliant