SCS 1000 Series Metal-In Static Shield Bag, OpenTop

This transparent metal-in static shielding bag is designed to provide a static safe environment for ESD sensitive electronic devices. Bags are printed with an ESD protective symbol and a lot of code for traceability. Open top (1000 Series) and ZipTop (3000 Series) styles are available. The bags are heat sealable. SCS Static Shielding Bags 1000 Series are manufactured from polyester, metal, and polyethylene laminate. The polyester dielectric in concert with the metal layer provides discharge shielding. The exterior being static dissipative allows electrostatic charges to be removed when grounded.

• Metal-In Film Laminate 0.0028in thick (0.07112mm) protects ESD sensitive components from electrostatic fields and electrostatic discharge
• < 10 nJ Discharge Shielding Energy Limit Test per ANSI/ESD STM11.31 – Meets ANSI/ESD S20.20 and ANSI/ESD S541 requirements for ESD shielding packaging inside and outside an ESD Protected Area
• Dissipative Inner and Outer Surfaces Rs 1 x 10E4 to <1 x 10E11 ohms per ANSI/ESD STM11.11 and Static Control Bag ANSI/ESD S11.4 Level 3 – Allows bag to be used throughout an ESD Protected Area and grounded when placed on a grounded surface or handled by a grounded operator
• Printed with ESD Protective Symbol and Lot Code Information – Meets the requirements of ANSI/ESD S541 for quality control purposes
• OpenTop (1000 Series) and ZipTop (3000 Series) styles are available
• Made in the United States of America

These are the standard sizes. Please see the Documents Section for Built-to-Order Sizes with minimum order quantity 1000 Series Metal-In OpenTop BTO List.