Siglent SDS6204A – Mixed Signal Oscilloscope (4 Channel / 2 GHz)

• 4 analog channels / 2 GHz bandwidth
• 16 digital channels (requires option SDS6000Pro-16LA and SPL2016 logic probe – sold separately)
• Waveform capture rate up to 170,000 wfm/s in normal mode, up to 750,000 wfm/s in Sequence mode
• Sampling rate up to 5 GSa/s (10 GSa/s ESR)
• Eye diagram and jitter analysis (option)

SIGLENT’s SDS6000A series Digital Storage Oscilloscopes are available in bandwidths of 2 GHz, 1 GHz and 500 MHz, have sample rate of 5 GSa/s (10 GSa/s ESR) at each channel, maximum record length of 500 Mpts/ch, and display up to 4 analog channels + 16 digital channels mixed signal analysis ability.

The Siglent SDS6000A provides 16 digital channels, enabling users to acquire and trigger waveforms, then analyze the pattern simultaneously with one instrument.

SDS6000Pro-16LA software and SPL2016 logic probe are sold separately – both items are required for operation.

This software option adds the following functions to the oscilloscope:

• Digital channel acquisition and analysis — Acquire and analyze the signals connected to the digital logic probe, including waveform display, save, parameter measurement, etc.
• Trigger on a digital channel — Trigger with the digital channel as the trigger source, isolating events of interest.
• Decode on a digital channel — Serial protocol decoding of a digital channel requires the installation of the serial decode option.

The SDS6000A supports arbitrary waveform / function generation (up to 25 MHz) by incorporating an SAG1021I external USB arbitrary waveform generator or SDG series benchtop unit, combined with the SDS6000Pro-FG software option.

SDS6000Pro-FG software option and SAG1021I/SDG series waveform generators are sold separately. A compatible, external waveform generator is required, in addition to the software for this option.

Display the decoded characters through the events list. Bus protocol information can be quickly and intuitively displayed in tabular form.

• Included standard: I2C, SPI, UART, CAN, LIN
• Optional: ARINC 429, CAN FD, FlexRay, I2S, MIL-STD-1553B, SENT, Manchester (decode only)

The SDS6000A supports eye diagram and jitter analysis/measurement. It can automatically extract the embedded reference clock from serial data and create the eye diagram. Measurement on multiple eye/jitter parameters is provided. Mask test on eye diagrams is supported.

The oscilloscope utilizes a hardware-based Mask Test function, performing up to 18,000 Pass / Fail decisions each second. It is easy to generate user-defined test templates to provide trace mask comparisons, making it suitable for long-term signal monitoring or automated production line testing

A Built-in Mask Editor application helps to create custom masks.

The SDS6000A supports an automatic Bode plot function. This function provides a frequency response curve of the device-under-test as well as the interface for output sweep parameter control and data display settings. At this time, either the SIGLENT SAG1021I arbitrary waveform generator or one of a SIGLENT SDG series arbitrary function generators are supported. During the sweep, the oscilloscope configures the generator output frequency and amplitude and then compares the input signal to the output of the DUT. Gain (G) and phase (P) are measured at each frequency and plotted on the frequency response Bode plot. When the loop response analysis is complete, you can move the markers on the chart to see the gain and phase values measured at each frequency point. You can also adjust the scale and offset settings for the amplitude and phase plots.

SDS6000Pro-FG waveform generator software option and SAG1021I/SDG series waveform generators are sold separately.

A. Touch screen display

B. Front panel controls

C. Probe compensation / ground terminal: Supplies a 0-3.3 V, 1 kHz square wave for compensating the probes

D. USB host ports: Connect to USB storage devices for data transfer or a USB mouse/keyboard for control

E. Digital input connector: for optional SPL2016 logic probe

F. Analog input connectors

G. Power switch

H. Supporting legs: Adjust to tilt oscilloscope 

A. SD card slot

B. Ext trigger input

C. Auxiliary out: outputs the trigger indicator. When Mask Test is enabled, outputs the pass/fail signal

D. HDMI video output

E. LNA port: 10M/100M LAN port for remote control

F. USB ports: One USB 2.0 device to connect with a PC for remote control and two USB 2.0 hosts to connect with a USB storage device or USB mouse/keyboard

G. AC power input

H. Handle