Description
SKF TMBP 20E – Blind Housing Bearing Puller

- With 6 sets of adaptors, a wide of range of deep groove ball bearings can be dismounted
- Bearing Bore Diameter(d): 30–160 mm
- Effective Arm Length: 547mm
The TMBP 20E is an adapter type puller for dismounting deep groove ball bearings in blind housings (i.e. when accessing the ball bearing is not possible through the outer ring or through the bore) with shaft dimensions between 30 mm and 160 mm (1.18 in and 6.3 in). The use of extension rods allows a long reach of up to 583 mm (23 in).
Suitability chart | ||||
SKF TMBP 20E is suitable for dismounting the following deep groove ball bearings | ||||
60.. series | 62.. series | 63.. series | 64.. series | 16… series |
6021–6032 | 6213–6230 | 6309–6320 | 6406–6418 | 16026–16032 |

Remove seal and open selected section of ball cage. Clean the swarf out.

Insert appropriate bearing adapter and rotate it 90° ensuring positive grip within the bearing race.

Insert the second adapter into prepared area diametrically opposed.
None
Reviews
There are no reviews yet.