Description
SPM 40010 – Shock Pulse Transducer, Glue-On, Max 13ft Cable
- 13ft cable length
- Glue-on shock pulse transducer
- Measuring range: Max. 100 dBsv
- Housing, base: Stainless acid proof steel, Sandvik Grade:1802, EN:1.4523
- Connector tightness: IP65 with TNC connector
Glue-on transducers 40010 can replace standard transducers on thin-walled bearing housings and on machines where the drilling of standard mounting holes would affect equipment warranties. They have the same measuring characteristics as standard transducers, but a flat, circular base which is glued to the measuring point, and an M3 screw for unloading and fixing.
Mounting
The transducer is mounted against a smooth, flat surface on the machine. Use a 2.7 mm drill for the mounting hole and make it 4.5 mm deep. Always plane the surface with a counterbore, min. diameter 15 mm.
The recommended adhesives are 3M DP810, Loctite 638 or Loctite 480. Please read the instructions for use and follow them carefully. Screw the transducer by hand into the mounting hole. The screw is self-threading. In narrow spaces a 17 mm socket (SPM 81086) may be used. The torque should not be more than 1 Nm. Wait until the adhesive has hardened before connecting the cable.
Which shock pulse transducer fits which SPM product?
| 40 000 series | 42 000 series | 44 000 series |
| Intellinova Parallel MB (INSMB4S) | ||
| Intellinova Compact | ||
| Leonova Diamond/Leonova Emerald | Leonova Diamond/Leonova Emerald | Leonova Diamond/Leonova Emerald |
| Leonova Infinity | Leonova Infinity | |
| BearingChecker | BearingChecker | |
| Intellinova Standard | Intellinova Standard | |
| MG4* | MG4* | |
| CMM* | CMM* | |
| * Support for either 40 000 or 42 000 series depending on model. |
Product General Attributes | |
|---|---|
| Product Weight | 50 GRAMS (0.110 LBS) |
| Shipping Weight | 0.2 LBS |
Reviews
There are no reviews yet.