Description
ThermoLabTower RO 40 – Barnstead LabTower RO Water Purification System, 40 L/hr.

Barnstead MicroPure Ultrapure Water Purification System
- Integrated 100 L tank with recirculation to optimize purity
- Bottom-mounted rollers
- Produces both Type 1 and 2 water
- Stand-alone system
- Utilizes EDI technology
Convert tap water into reverse osmosis (RO) water with integrated 100L storage using the Thermo Scientific™ Barnstead™ LabTower™ RO Water Purification System, which allows the user to easily read parameters with an ultra-modern controller. Mounted on casters, this compact system is an ideal pure water supply for any laboratory. The system is well-suited as a feed water source for dishwashers, autoclaves and general laboratory use. Choose from two system options with permeate flows of 20, 49 or 60L/hr. Resistivity/conductivity is clearly displayed on a large back-lit control panel that tilts for optimum viewing.
Advanced technology in a mobile design:
- An ultra-modern microprocessor control provides easy-to-read system parameters.
- Completely drainable integrated 100L high-purity water reservoir has a low-noise pressure booster as a standard component.
- Mounted on casters, the compact LabTower RO system is an ideal pure water supply for any laboratory.
- System is ideally suited as a feed water source for dishwashers, autoclaves and general laboratory use.
- A built-in pretreatment unit – consisting of a hardness stabilizer for protection of the reverse osmosis module from hardness formers and an activated carbon/5μm combi-cartridge – protects the system against free chlorine and particles, ensuring the long service life of downstream purification stages.
Compact and mobile design:
- System includes three system options with permeate flows of 20, 40 or 60L/hr.
- Stand-alone design with integrated 100L tank takes up ZERO bench space—casters allow for easy relocation.
- Systems can be upgraded later to accommodate growing water capacity demands.
Integrated 100L reservoirL
- System stores 100L of RO water in a high-purity polyethylene PE opaque reservoir.
- Adjustable reservoir volume can be programmed for times of low demand-dispense from the reservoir to supply autoclaves, dishwashers, ultrapure water systems, etc.
Easy-to-operate clear display:
- Resistivity/conductivity clearly displayed on large back-lit control panel that tilts for optimum viewing.
- Status of current operating mode clearly indicating “production”, “stand-by”, “cleaning” or “disinfection” modes.
- Reservoir fill-level is shown as a percent.
- System parameters are code-protected to prevent accidental changes to set points.
GLP-compliant documentation:
- LabTower RO has been developed to fulfill GLP requirements.
- Recorded and traceable data can be obtained by printout via the RS-232 interface and accessory printer.
- Highly qualified and precise measurement of the conductivity is ensured by the cell constant of 0.16 cm-1.
Water Purification Systems | |
---|---|
Type (H2O Purification) | RO |
Feedwater Source (H2O Purification) | Tap/Potable |
Voltage (Life Science) | 100-240 VAC |
Product General Attributes | |
Product Weight | 110 LBS |
Product Height | 59 IN |
Product Length | 23 IN |
Product Width | 18 IN |
Power Supply Voltage | 240V Only |
Country of Origin | Germany |
Reviews
There are no reviews yet.