Transforming Technologies GK1000 – ESD Table Mat Grounding Kit

• Low Profile
• Contains all necessary items to ground table matting
• Universal snap kit easily installs a ground snap into a range of mat thicknesses
• Easy to install kit for grounding ESD table mats
• User installable with a screwdriver

Easy to install kit to ground ESD table matting and up to two ESD wrist straps. Transforming Technologies GK1000 Table Mat Ground Kit offers the hardware required by ANSI/ESD S-6.1 and ANSI/ESD-S20.20 to ground an ESD table mat The CP2522 is a low profile common point ground with two banana jacks which allow two workers the ability to plug into onto one ground point. The molded connection point houses a 1 meg Ohm 1/4 watt resistor. The ground cord attaches to table mats via the CS1090 universal snap kit. The CS1090 Universal Snap Kit includes a 10 mm stud, 10 mm socket, threaded backing washer, conical nut, long screw, short screw, and ESD common point ground label. Everything needed to install a stud or socket on all soft materials up to 0.375″ thick. Screws are 6-32 Flat Head Phillips machine screws; one 0.25″ long and one 0.375″ long. Punch a hole through the mat and screw on the socket or stud, whichever is preferred. All that is needed is a Phillips screwdriver Meets or exceeds requirements of ANSI ESD-S20.20 and ANSI/ESD S-6.1. ESD Standards require 1 ground point per mat or every 10ft of ESD matting.