Hioki PW3360-21/5 Pro KIT – Demand Analyzer (Harmonic Analysis Function, 3 x clamp on sensor 9694, power logger viewer SF1001, SD memory card 2 GB Z4001, battery set PW9002, PW3360 hard case)

• Supports single to three-phase, 4-wire circuits
• Measure between 90V to 780V
• Simultaneously measure up to three single-phase, 2-wire circuits (in the same power system)
• Slim, compact design that can be placed anywhere
• Store months of data on SD cards

The PW3360 compact 3-Phase 4-Wire energy loggers monitor power demand and other power parameters to aid in energy audits and validate energy saving measures. The PW3360-21 has a harmonic analysis function.

The PW3360’s QUICK SET feature is an on-screen guide that walks you through the setup process, right up to starting measurement. Even if you’re unaccustomed to how clamp-on power loggers work, you’ll be able to easily configure and connect the instrument for 3-phase power measurement. In addition, by alerting you to any wiring mistakes, the device’s “wiring check” function serves to prevent measurement errors that are caused by undetected wiring mistakes.

The PW3360 displays recorded measured values as a graph for convenient use in power management. In addition to instantaneous measured values, you can review maximum, minimum, and average values by moving the cursor on the demand and trend graph displays.

This power logger is an essential tool for power-saving activities. Thanks to a compact design that weighs just 550 g, it’s easy to take into the field and install in confined locations.

• 5A AC clamp sensor with voltage output for measuring load current
• For inverter devices or commercial power lines
• For measuring the secondary side of 5A CTs
• Fits in narrow spaces due to compact design

Analyze voltage and current harmonics on a 50/60 Hz power line from the fundamental waveform to the 40th order.

• Displays the RMS value, content, and phase angle (numerical list or graph display) for each harmonic order.
• Vector display of power phase angle