No products in the cart.
Menu
Categories
PIE 830 High Accuracy Multifunction Diagnostic Calibrator with Dual Display
36 people are viewing this product right now
Shipping calculated at checkout.
Estimated delivery:3 days
Multifunction Diagnostic dual channel calibrator. Comes with rubber boot, hands free carrying case, test leads and NIST cert.
- Lighten up your toolbox
Compact calibrator replaces toolbox of single function devices Milliamp • Voltage • Frequency • pH Thermocouples • RTDs • Pressure • Troubleshooter - First multifunction calibrator with three troubleshooting tools
Troubleshoot loop problems – Quickly diagnose ground fault and current leakage with patented Loop Diagnostic technology.
Automatically detect 2, 3 or 4 wire RTDs – Trouble shoot sensor connections and find broken wires with patented technology.
Troubleshoot wiring problems – Beep with continuity checker. - Lighten up your toolbox
Compact calibrator replaces toolbox of single function devices Milliamp • Voltage • Frequency • pH Thermocouples • RTDs • Pressure • Troubleshooter - Simulate pH probes & calibrate pH transmitters
Source from 0.000 to 14.000 pH @ 25 degrees C (77 degrees F) into transmitters & analyzers corresponding to -414.12 to +414.12 mV - Technician friendly operation
Intuitive EZ-DIAL Double Click Menu makes it easier to setup than other multifunction calibrators. Same as the single function PIE Calibrators. - Calibrate 2 wire transmitters – control input & monitor output
Simulate transmitter inputs while powering it with the internal isolated 24 V supply & measuring the 4-20 mA output. Dual display of transmitter input & output. Simplify HART hookups with built-in 250 Ohm resistor - Use it as a milliamp and voltage calibrator
Source 0 to 24.000 mA, 0 to 10.250 V dc, -20.000 to 99.999 mV and -500.00 to 999.99 mV. Read to 24.000 mA, 60.00 V dc -99.999 to +99.999 mV and -999.99 to +999.99 mV. Simulate 2-Wire Transmitters. - Calibrate directly in temperature to 0.1 degrees C & 0.1 degrees F
Compatible with the instruments you use including all brands of smart transmitters and PLCs with 14 thermocouple & 9 RTD types. - Checkout flow & vibration systems
To 2000 CPM (Counts-Per-Minute), 999.99 Hz, 9999.9 Hz & 20.000 kHz. - Measure pressure with optional pressure modules
32 modules for gauge, differential, absolute & compound pressure - Easy to read
Turn on the backlight & easily see the display in dark areas of the plant - Quickly set any three outputs plus automatic stepping & ramping
Easily set any value quickly with the adjustable “DIAL” plus store any three output settings for instant recall with the EZ-CHECK™ switch. Choose between 2, 3, 5 & 11 steps to automatically increment the output in 100%, 50%, 25% or 10% of span. Select RAMP to smoothly increase and decrease the output between Zero and Span. Set step/ramp time to match your system from 5, 6, 7, 8, 10, 15, 20, 25, 30 and 60 seconds. - Measure temperature sensors, frequency pickups, loop currents, voltage levels & pressures
Check the values of your process sensors. Instantly recall MAX and MIN values to see process variability
Guarantee Safe and Secure Payment Checkout
Description
PIE 830 – High Accuracy Multifunction Diagnostic Process Calibrator with Dual Display
- Checkout flow & vibration systems
- To 2000 CPM (Counts-Per-Minute), 999.99 Hz, 9999.9 Hz & 20.000 kHz.
- Measure pressure with optional pressure modules
- 32 modules for gauge, differential, absolute & compound pressure
- Easy to read
- Turn on the backlight & easily see the display in dark areas of the plant
The PIE Model 830 is more than a multifunction calibrator. It is also a loop detective that is able to diagnose common problems that other test equipment just can not find. Have a flooded junction box or unknown ground faults? Our Loop Diagnostic technology will detect it. Or use the LoopScope to see at a glance all the parameters – milliamps, voltage and resistance – in the loop.
Stop throwing away perfectly good transmitters only to find the problem is somewhere else in the loop. Setup the PIE Model 830 as an isolated universal transmitter and turn on the Loop Diagnostics. The display will tell you EXACTLY the sensor input, the current output and if there is any uncontrolled current in the loop due to a ground fault, corrosion bridge or moisture. If the control system sees no problem when the 830 is acting as a transmitter THEN you can replace the faulty transmitter. With RTDs the 830 automatically detects which of the 2, 3 or 4 wires are connected and unbroken quickly alerting you to a sensor problem.
First calibrator with FIVE troubleshooting tools
1 Detect hidden loop problems
Quickly diagnose troublesome ground faults & current leakage with patented Loop Diagnostic technology. These problems are undetectable with other instruments!
2 Check all loop parameters at once with the LoopScope
Simultaneously displays current, voltage and resistance to let you know the condition of a live loop. Finds problems with power supplies & loops with too many loads. Patented by PIE!
3 Automatically detect 2, 3 or 4 wire RTDs
Trouble shoot sensor connections and find broken wires with patented technology. LCD indicates which of the four wires are connected to an RTD sensor.
4 Swap out faulty transmitters to diagnose control issues
Easily setup the 830 as a universal isolated transmitter for temperature, frequency, millivolt or pressure. If the loop is back under control you know the transmitter was faulty. Turn on the LoopScope to simultaneously see the loop current, power supply voltage and loop loads for troubleshooting.
5 Troubleshoot wiring problems without a multimeter
Built in continuity checker with beeper quickly finds broken wires or shorts in instrumentation wiring. Also handy for checking operation of relays and controller outputs.
Advantages of the PIE 830 over the Altek 830
- Higher Accuracy
Accurate to 0.006 mA, Pt 100 Ohm RTD to 0.2°C/0.4°F, Type K to 0.3°C/0.6°F, pH to 0.003 pH - Loop Diagnostics – Unique to PIE
Only multifunction calibrator that can power up a loop and tell you that there is moisture, corrosion or a ground fault causing current to leak to ground. - Simulates a pH probe
Calibrate pH tranmitters & analyzers before attaching probe to verify that each is working correctly. - Isolated internal 24 V loop supply
Calibrate 2-wire transmitter with electrical isolation between the input and the output for more accuate and stable readings.
- Wider range of pressure modules & scales
Choose from 32 different modules with up to 32 engineering units for greater compatability with your processes. - Works with more instruments
Compatible with smart transmitters, multichannel recorders, PLCs and DCSs -GUARANTEED! More Thermocouple & RTD ranges with 0.1° resolution and better accuracy. - Smaller & lighter
Pocket sized and easier to carry - LED for optical pickups
LED flashes green in sync with frequency output. Illuminates red for overload conditions. - Easier to hook-up
Diagrams are shown on the display indicating where to plug in the test leads.
Process / Calibration/Multifunction Calibrators Template | |
|---|---|
| Type | Hand Held |
| Measure Voltage | Yes |
| Loop Voltage Min | 2 V |
| Simulate Loop Voltage | Yes |
| Loop Voltage Max | 60 V |
| Voltage Measurement Max | 60.00 V |
| Voltage Measurement Min | 0.00 V |
| Source/Simulate DC Current | Yes |
| Measure DC Current | Yes |
| Current Measurement Max | 24.000 mA Current Measurement Max 125.00% of 4-20 mA |
| Current Measurement Min | 0.000 mA Current Measurement Min -25.00 of 4-20 mA |
| Source/Simulate Resistance | Yes |
| Resistance Measurement Max | 4010.0 Ohms |
| Resistance Measurement Min | 0.00 Ohms |
| Measure Frequency | Yes |
| Frequency Measurement Max | 20.000 kHz (20000 Hz) |
| Frequency Measurement Min | 0.001 Hz |
| Measure RTD | Yes |
| Measure Thermocouples | Yes |
| Source/Simulate Pressure | No |
| Pressure Measurement | Dual Pressure Sensor Pressure Measurement Modules available in Gauge, Compound, Absolute and Differential Pressure Ranges |
| Pressure Modules Available | Yes Pressure Modules Available 32 Different Pressure Modules available |
| Hart Compatible | No |
| FieldBus Compatible | No |
| Backlighted | Yes |
| Graphical Screen | Yes |
| Types RTD/Thermocouples Accepted | B, C , E, J, K, L, N, R, S, T, U Types RTD/Thermocouples Accepted Source and Read Thermocouple types J, K, T, E, R, S. B, N, G, C, D, P, L and U |
Product General Attributes | |
| Unique Features | Quickly diagnose troublesome ground faults & current leakage with patented Loop Diagnostic technology. These problems are undetectable with other instruments!! Check all loop parameters at once with the LoopScope™ Simultaneously displays current, voltage and resistance to let you know the condition of a live loop. Finds problems with power supplies & loops with too many loads. Patented by PIE! Automatically detect 2, 3 or 4 wire RTDs Trouble shoot sensor connections and find broken wires with patented technology. LCD indicates which of the four wires are connected to an RTD sensor. Swap out faulty transmitters to diagnose control issues. Easily setup the 830 as a universal isolated transmitter for temperature, frequency, millivolt or pressure. If the loop is back under control you know the transmitter was faulty. Turn on the LoopScope to simultaneously see the loop current, power supply voltage and loop loads for troubleshooting. |
| Warranty | 3 YEARS |
| Warranty Details | 3 Year Return to Factory Warranty against defects in materials and workmanship. |
| Safety Approval | CE |
| Product Weight | 12.1 OUNCES (0.756 LBS) |
| Product Height | 1.60 IN |
| Product Length | 5.63 IN |
| Product Width | 3.00 IN |
| Shipping Weight | 1.8 LBS |
| Data Logging | No |
| HTS/Schedule B Number | 9031.80. 8085 |
| ECCN Number | EAR99 |
| Calibration Included | Factory Calibration, NIST Calibration |
| Battery Type | AA |
| Power Supply Voltage | Battery Powered |
| Country of Origin | United States |
You must be logged in to post a review.
Manuals/Guides
| Weight | 12.1 lbs |
|---|---|
| Dimensions | 5.63 × 3 × 1.6 in |
Related products
Sale
B&K Precision 394B – Process Multimeter
Original price was: $869.00.$698.30Current price is: $698.30. Add to cart
PIE 830 High Accuracy Multifun... $4,717.90
Our team of knowledgeable professionals is here to help you make informed decisions. Whether you need product recommendations, technical support, or guidance on your purchase, we're just a click away.
Contact Us Now:
📧 sales@nestesinstruments.com
📞 +1 (833) 763-7837
Let us assist you in finding the perfect solution!
Contact Us Now:
📧 sales@nestesinstruments.com
📞 +1 (833) 763-7837
Let us assist you in finding the perfect solution!
Reviews
There are no reviews yet.