JBC PHXLE-2KA – XL Preheater Set (230 Volt Version)

• 230 volt version – not for use in the United States

• Extra large preheater set
• 20.07 x 24 inch heating area
• Works with up to eight thermocouples
• Complete system for preheating large circuits commonly found in aeronautics, communications and more

With a heating area of 20.07 x 24 inches, the JBC PHXLE-2KA is a complete pre-heating system for large circuits. The system works with up to eight thermocouples and offers matchless reliability in temperature accuracy and control so that no component is damaged.

Through the JBC software suite, the preheater can be synchronized with other JBC hot air, soldering and fume extraction equipment in order for them to work jointly and to perform your rework process optimally.

Please note, the PHXLE-2KA is a 230 volt product and is not designed for use in the United States. If you are in the US, please see PHXLE-1KA

Three work models

The PHXLE-2KA features three work modes:

• Power Mode allows working at a fixed power level with the option of using protection thermocouple
• Temperature Mode keeps the PCBA at a selected temperature, using the regulation thermocouple and, optionally, protection thermocouples
• Profile Mode allows control of the heating rate of the PCBA by the use of a control and protection thermocouple, without exceeding the recommended limit levels in each application. It features 22 customizable profiles

Up to eight thermocouples can be connected while in any of the three work modes.

1. 2.8″ Color TFT Screen

2. Foot for Vertical Set Up

3. Button for Foot Folding and Unfolding

1. Sliding Guides

2. Clamp Knobs

3. Adjusting System for Changing Height

4. Slot Clamps

5. Allen Key

The PHXLE-KA can be connected to single-phase or three-phase networks. A power supply cable is required. Use the following table to determine the cable size and connection: