Radwag AS.5Y Analytical ELLIPSIS 5Y SERIES Balances

AS.5Y Analytical Balances

Functions:

• Autotest – Diagnostic function aiming at metrological parameters determination (repeatability), the parameters are determined for the actual conditions of use.
• Dosing – Weighing to a target value. This solution is used for weighing powders, liquids and loose materials.
• Percent Weighing – Used for comparison of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process
• Parts Counting – Quick counting of samples of similar mass.
• Peak Hold – Control of the maximum mass on the pan.
• Formulations – Weighing of predefined ingredients, according to the order described in the formulation.
• Statistics – Real-time statistics determined from carried-out weighings. This supplies the user with the following information: Max and Min standard deviation, average value, variance, range et.
• Checkweighing – Control of sample mass in the set min/max thresholds.
• IR Sensors – Programmable function supporting the weighing process through control of the following options: sliding weighing chamber doors, printout, zeroing, tarring, etc.
• GLP Procedures – Diagnostic function allowing to objectively document performed measurements. GLP procedures may be either presented in a short report form or an extended one.
• Animal Weighing – Control of mass change over a set period of time.
• Pipettes Calibration – Checking piston pipettes according to customer-specific requirements or ISO 8655.
• Air Density Correction: Function performing correction of mass measurement indication, wherein the air density is taken into account.
• Density Determination – Determining the density of solids and liquids.
• Differential Weighing – Analyzing the change in mass of a single sample over time.
• Ambient Conditions Monitoring – The possibility of cooperation with the THBR 2.0 system.
• Statistical Quality Control (SQC) – Statistical mass control with set thresholds.
• Packaged Goods Control – Pre-packaged Goods Control mode enables to collect weighings from RADWAG-designed weighing instruments, carrying out control and generating PGC reports.
• ALIBI Memory – “ALIBI” memory enables saving and storing up to 100000 measurements.
• Wi-Fi – Thanks to wireless communication between the computer and a balance, it is possible to use a balance inside a laminar flow hood and a fume cupboard.

Do you need a balance that not only determines weight with impressive accuracy, but also performs a digital audit, responds to your voice commands, and uses ambient light to communicate statuses and alerts?

If so, learn about the functionality of the ELLIPSIS series of balances:

Ensures that your balance is ready for use. It enables air buoyancy compensation in real-time. What is more, it informs about the need for a balance inspection or a periodic audit of the balance’s accuracy and sensitivity.

Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history.

For the first time ever, the balance will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these.

Ambient Light – An Innovative Way for the Balance to Communicate With the User

The light colour will tell you about status, process results, procedures, or alerts.

Use the balance on any device connected to it. This can be a smartphone, tablet, or computer.

ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user.

It’s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note.

This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found.

Prepared to display what you need most at any given moment.

The balance displays whether the value of the weight you want to weigh is below or above the minimum weight threshold.

Do you work in the pharmaceutical industry? Do you need a digital signature?

The laboratory balance which, as a standalone, fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11.

• Full data security
• Electronic signatures
• Validations
• Electronic records
• Audit trails

Adjacency, which takes place at two measurement points instead of one, improves measurement precision over the full weighing range. And what does this mean for you? More accurate measurement.

Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook.