Rigol MSO5074 – Four Channel, 70 MHz Digital / Mixed Signal Oscilloscope

Four channel, 70 MHz digital / mixed signal oscilloscope

• Up to 8 GSa/s real-time sample rate
• 100 Mpts memory depth, optional memory depth up to 200 Mpts
• 16 digital channels included – requires optional PLA2216 logic probe to operate
• Integrates seven instruments into one

Bandwidth and the sample rate are two key technical specifications that engineers take priority in choosing the digital oscilloscope. Bandwidth determines the maximum frequency that the oscilloscope can acquire. The higher the bandwidth of the oscilloscope, the better the oscilloscope can keep the steep, fast, abundant harmonics components and energies of the signal under test. Whereas the sample rate determines the time interval of the sample points, that is, determines the refinement of the outlined waveforms. The MSO5000 series provides a maximum of 8 GSa/s real-time sample rate and 23X sample rate/bandwidth ratio for 350 MHz bandwidth, which makes itself far ahead of the same level products.

1. Digital Oscilloscope

• Four bandwidth models: 350 MHz, 200 MHz, 100 MHz, and 70 MHz;  with the bandwidth upgradeable
• Up to 8 GSa/s real-time sample rate
• Up to 200 Mpts memory depth (option)
• Maximum waveform capture rate of 500,000 wfms/s
• 350 MHz passive voltage probe for each channel (standard)

2. Logic Analyzer

• Standard 16 digital channels – requires optional PLA2216 logic probe to be activated
• 25 Mpts memory depth for the waveforms of all the digital channels
• Up to 1 GSa/s sample rate
• Hardware real-time waveform recording and playback functions supported
• Mixed (analog channel and digital channel) trigger and decode supported
• Convenient digital channel grouping and group operation

3. Spectrum Analyzer

• Standard configuration of enhanced FFT, real-time operation for max. 1 Mpts waveform data
• Max. frequency range: oscilloscope analog bandwidth
• Up to 4 groups of operations can be displayed at the same time
• Independent FFT color persistence view supported
• Up to 15 peaks available for the peak search function; event table available to be exported

4. Arbitrary Waveform Generator (Option)

• Standard configuration of 2 waveforms output channels for the hardware, and only AWG option is required to be ordered
• 13 pre-defined waveforms
• Up to 25 MHz frequency
• Up to 200 MSa/s sample rate
• Advanced modulation, sweep, and burst signal output supported

5. Digital Voltmeter

• 3-digit DC/AC, RMS/AC+DC RMS voltage measurement
• Sound an alarm for reaching or exceeding the limits
• Display the latest measurement results in the form of a diagram, and display the extrema over the last 3 seconds

6. High-precision Frequency Counter and Totalizer

• Optional 3 to 6-digit high-precision frequency counter
• Support the statistics on the maximum and minimum values of the frequency
• 48-bit totalizer (standard)

7. Protocol Analyzer (Option)

Support RS232/UART, I2C, SPI, CAN, LIN, I2S, FlexRay, and MIL-STD-1553 serial bus