Description
| The Simpson183 multipliers increase the capability of a panel meter beyond it’s normal monitoring ability. Use the DC Volt multiplier to reduce the voltage signal between the source and the load to safely monitor high voltage signals up to 5000 Volts. A multiplier is needed if the panel meter is not self-contained to handle high voltage. A multiplier is shipped with each analog meter when required (except for Tru-Vue meters, where a multiplier must be ordered separately). A typical wiring diagram shown to the right depicts the Model 183 installed in series with the meter on the high side of the line and the meter at ground potential. The multiplier must be installed in an inaccessible location, such as behind the panel or inside an enclosure to prevent access to the high voltage. |

Reviews
There are no reviews yet.