SPM Vibration 44911 – Glue-On Shock Pulse Transducer for Ex Environment (M8, 54.7mm Length)

• Glue-on Shock Pulse Transducer for Potentially Explosive Atmosphere (Mining, Explosive gases/dust)
• Ex Certifications: I M1 Ex ia I Ma, II 1G Ex ia IIC T4 Ga, II 1D Ex ia IIIC T 135°C Da, Ta: -40°C to +120°C
• Thread: M8 x 1.25
• Length: 54.7mm

The SPM transducer 44911 has a flat base that is glued to the measuring point and an M3 screw for unloading and fixing. The recommended adhesives are 3M DP810, Loctite 638, or Loctite 480.

The SPM 44000 family of transducers for potentially explosive atmospheres is approved for use in mining, explosive gases, and dust. The transducer is connected to a measuring SPM instrument for bearing condition monitoring. Measuring instruments in hazardous areas must be suitable certified. Instruments outside hazardous areas must be connected via a suitable and certified barrier.

The transducer connector must be fitted with either a mating cable plug or a protection plug to maintain the ingress protection of minimum IP54. The isolation foot must not be exposed to the flow of non-conductive media and hazardous electrostatic charging must be avoided when used in group IIC zone 0 or used in group IIIA/B/C atmosphere.

Leonova Emerald, Intellinova Parallel MB