Description
Fluke I5S-PR 1750, 5A Current Clamp
Low level current clamp measures up to 5 A AC
CAT III 600 V (For insulated conductors only)
Take accurate readings without breaking the circuit
Compact shape makes transporting and storing convenient; the clamp measures only 116 x 43 x 23 mm (4. 6 x 1.7 x .9 in)
Expand the use of your Fluke 430 series power quality tool or ScopeMeter test tool with this 5 A AC current clamp
The i5s-PR 1750 5A AC Current Clamp operates with the Fluke 1750 Power Recorder. It supplies accurate non-intrusive measurement of AC current. The probe has a current range from 0.05 A to 5 A. The frequency range is 40 Hz to 5 kHz. The clamp is approved for CAT III 600 V.
Expand the use of your Fluke 430 series power quality tool or ScopeMeter test tool with this 5 A AC current clamp, specially configured to provide good accuracy at low levels e.g. while taking measurements on secondary current transformers.
This Fluke product will be free from defects in material and workmanship for one year from the date of purchase. This warranty does not cover fuses, disposable batteries, or damage from accident, neglect, misuse, alteration, contamination, or abnormal conditions of operation or handling. Resellers are not authorized to extend any other warranty on Fluke’s behalf. To obtain service during the warranty period, contact your nearest Fluke authorized service center to obtain return authorization information, then send the product to that Service Center with a description of the problem.
Operation:
- If necessary, add a dual banana plug to BNC adapter to the i5s BNC connector.
- Connect the clamp cable to the instrument. If using an adapter, use the common and volts inputs of the meter and switch it on.
- Make sure the measurement instrument is set to the proper range.
- Make sure the arrows on each side of the Current Clamp face towards the load of the circuit.
- Open the Current Clamp jaw by pushing the release button toward the jaw until the latch has cleared the barrier, then press down to open the jaw.
- Connect the Current Clamp jaws around the insulated conductor to be measured and release the button. Ensure that the release button has returned to the original position to resume the circuit testing.
To avoid shock or personal injury, keep fingers behind the tactile barrier, see Figure 1.
Clamp Meters/Current Clamp Adaptors / Current Clamps Template | |
|---|---|
| Type (Current Clamp Adaptors | CT |
| Maximum Current AC | 5 A |
Product General Attributes | |
| Warranty | 1 YEARS |
| Product Height | 1.25 IN |
| Product Length | 8.25 IN |
| Product Width | 4.50 IN |
| Country of Origin | France |
| Shipping Height | 1.25 IN |
| Shipping Length | 8.25 IN |
| Shipping Width | 4.50 IN |
Reviews
There are no reviews yet.